Stuart Science Equipment
152Pages

Stuart® Catalogue Water Baths and Purification Rockers and Shakers Rotary Evaporators Mixers Melting Point Apparatus Incubators Hotplates and Stirrers Homogenisers Colony Counter Block Heaters Science Equipment with BioCote® antimicrobial protection Page 1

Bibby Scientific Limited Some of the most famous names in science... As one of the largest broad based manufacturers of benchtop laboratory equipment worldwide, Bibby Scientific Ltd provides internationally recognised brands with reputations for product quality and high performance. These four famous brands are now brought together in a single package to offer an excellent level of quality, service and support. Electrothermal® are the newest addition to the Bibby Scientific portfolio and are market leaders in heating mantle design and manufacture. The extensive Electrothermal® range...

Contents Equipment for Analysis i Introduction to Bibby Scientific ii Contents iii Stuart Equipment 5 Block Heaters 13 Colony Counter 15 Flocculators 17 Heating Mantles 19 Homogenisers 25 Hotplate Stirrers 27 Hotplates 35 Hotplate Stirrers 43 Stirrers 49 Incubators, Standard, Hybridisation & Shaking 59 Melting Point Apparatus 67 Mixers 69 Rollers 73 Rotators 79 Vortex Mixers 83 Overhead Stirrers 87 Recirculating Coolers 89 Rotary Evaporators 97 Rockers and Shakers 99 Rockers 103 Shakers 109 Water Baths, Static and Shaking 115 Water Purification 125 Complementary products 129 Technical...

Welcome to Stuart Welcome to the 16th edition of the Stuart® benchtop science equipment catalogue. We are constantly looking to improve and expand the Stuart® range so since the last catalogue we have introduced a host of new products. Following the success of our SI500 shaking incubator we’ve added a version specifically designed for Microtitre plates and also a larger version, which while remaining a bench mounted incubator, can comfortably take 6 x 2L flasks. We have completely redesigned our range of Waterbaths for this version of the catalogue, the all new units come with digital...

Block Heaters with BioCote® antimicrobial protection Stuart® Block heaters are suitable for microbiology and clinical laboratories for incubation, boiling, inactivation, wet washing, sample concentration, enzyme analysis and other general applications. Suitable for test tubes, cuvettes, micro-centrifuge tubes, 96 well plates and other small containers. Page 6 Analogue Block Heater Page 7 Digital Block Heaters Page 8 Digital dual control block heaters Page 9 Digital three block heaters Page 10 Sample concentrator Page 11 Aluminium blocks Page 12 Safety covers Find out more! Please scan the...

SBH130 Key Features Block heater, analogue, • Analogue control, economical price • 130°C maximum temperature • “Hot” warning light indicates blocks are too tubes, cuvettes and microtitre plates. With simple analogue hot to touch setting of temperature for ease of use. “Hot” warning light • Uniform and stable temperatures Designed for the precise heating of test-tubes, microcentrifuge will flash whenever the block temperature is above 50°C. Technical Specification Temperature range Ambient +8°C to 130°C Temperature stability at 37°C ±0.1°C Uniformity within block at 37°C ±0.1°C Uniformity...

Key Features SBH130D and SBH200D • Choice of 130°C or 200°C maximum Block heaters, digital, temperature • Digital setting and display Construction similar to the SBH130. The bright, easy to read LED display • Uniform and stable temperatures facilitates very easy setting of the required temperature and also accurate monitoring of the actual temperature. Excellent temperature stability and uniformity is maintained via sensitive electronic controls. Heats to 100°C in less than 12 minutes. Technical Specification SBH130D Number of blocks 2 SBH200D 2 Temperature range Ambient +8°C to 130°C +8°C...

SBH130DC and SBH200DC Key Features Block heater, digital, dual control, • Two blocks with independent temperature ontrol c • Choice of 130°C or 200°C maximum temperature control allowing them to be set at different temperatures. temperature Excellent temperature stability and uniformity is maintained in each • Construction as SBH:D (see previous block. The unit takes up less space than two block heaters and is ideal page) Innovative design accommodating two blocks with independent for applications where samples have to be transferred between two temperatures very quickly, or for two...

Block heaters, digital, three block, The same precise heating and control of the two block SBH:D models but with 50% more capacity of a third block. Excellent temperature stability and uniformity is maintained via sensitive electronic controls. All Stuart® three block heaters are compatible with the Stuart® Sample concentrator, for faster sample concentration. Technical Specification_ Temperature range Ambient +8°C Ambient +8°C Uniformity within block at 37°C ±0.1°C ±0.1°C Uniformity within block at 130°C ±1°C ±1°C Net weight, kg (without blocks) 3.2 3.2 • Extra capacity three block models...

SBHCONC/1 Sample concentrator A sample concentrator is a fast and convenient way of concentrating multiple samples in a block heater at once. Utilising a simple gas delivery system the sample concentrator passes gas over the surface of your samples via stainless steel needles. This in combination with the heat from the block heater below produces ideal conditions for fast, efficient evaporation. The gas delivery needles are inserted into a silicon membrane, in virtually any configuration. The height of the sample concentrators gas reservoir is located on an adjustable stand for accurate...

Aluminium blocks For use with Stuart® Block heaters, For use with Stuart® block heaters. Manufactured from anodised aluminium and all with a separate hole to accommodate a thermometer if desired. For accurate thermometer measurements please check your thermometer has a suitable immersion depth. All blocks* have dimensions (w x d x h) of 75 x 95 x 50mm and can be used in any combination. Please note all Stuart® block heaters will only operate effectively if the full compliment of blocks is present. Technical Specification / Ordering Infomation Part No. Tube (dia. / type) No. of holes (dia. x...