Catalogs >
Stuart Equipment >
Microcentrifuge, SCF2

Microcentrifuge, SCF2
1Pages

Catalog excerpts

Mini Centrifuges Microcentrifuge, SCF2 • • • • • • • Variable speed microfuge Maximum speed 13,500rpm Timer and pulse start 12 tube capacity Compact and quiet Lid safety mechanism BioCote® antimicrobial protection The SCF2 is a compact microcentrifuge for centrifugation of up to 12 x 1.5ml or 2.2ml microfuge tubes or four strips of 8 x 0.2ml tubes at speeds of up to 13,500rpm. The unit is supplied with adaptors for use with the fixed angle rotor to enable 0.5ml and 0.2ml tubes to be centrifuged. The rotors are easily installed without the use of tools. Centrifugation speed can be displayed as either rpm or rcf and the timer can be set for run times of between 1 and 30 minutes. In addition, a pulse button enables a rapid spin down by accelerating the rotor to the preset rpm then promptly decelerating. For safety, the door of the SCF2 remains locked while the rotor is in motion. Technical Specification Rotor Fixed angle rotor Maximum speed,rpm 13,500 Maximum RCF 12,300 x g Maximum capacity Strip tube rotor 6,000 1,850 x g (outer) 1,542 x g (inner) 12 x 1.5 or 2.2ml tubes 4 x 0.2ml 8-tube strips Both modes Timer Acceleration time Deceleration time Noise level Safety Power Dimensions, mm (w x d x h) Weight, kg 1 to 30 min (1 min intervals) ≤12s (to full speed) ≤16s (fully stopped) ≤60dB Door lock 220V, 50/60Hz 208 x 245 x 145 4.4 Ordering information Model Spares and Accessories Model Strip tube rotor, 4 x 0.2ml 8-tube strips 0.5ml tube adaptors 0

Open the catalog to page 1