- Catalogs
- STS Sensor Technik Sirnach AG
- ATM.1ST/T High Precision pressure and temperature transmitter
ATM.1ST/T High Precision pressure and temperature transmitter
ATM.1ST/T High Precision pressure and temperature transmitter
- High precision pressure and temperature sensor with electronic compensation across the entire temperature range.
- Customizable pressure and temperature measuring ranges.
- Modular product design allows for fast customization.
- Short response time suitable for dynamic pressure measurements.
- Pressure Measuring Range: 0.1 to 0.5 bar, >0.5 to 2 bar, >2 to 25 bar.
- Overpressure: 3 bar, 3 x FS.
- Burst Pressure: >200 bar.
- Accuracy: Zero-based accuracy according to DIN-16086, including hysteresis and repeatability at ambient temperature.
- Total Error: Includes accuracy and temperature influences at maximum signal span (16 mA).
- Response Time: <1ms for 10 to 90% FS.
- Long Term Stability: <0.5% FS / <4 mbar, <0.2% FS / <4 mbar, <0.1% FS / <0.2% FS.
- Standard Range: -25 to 100°C.
- Lower End of Range: -50°C.
- Upper End of Range: 150°C.
- Temperature Span: >30°C.
- Accuracy: <±0.5°C.
- Response Time: T 0.50 = 2s, T 0.63 = 3s, T 0.90 = 5s.
- Self Heating: Water at 0 m/s = 0.05°C, Air at 0 m/s = 1.0°C.
- Operating Temperature: -40 to 125°C.
- Process Temperature: -50 to 150°C.
- Storage Temperature: -40 to 125°C.
- Output Signal: 4 to 20 mA / 3-wires or 4-wires.
- Power Supply: 9 to 30 VDC.
- Supply Influence: <0.05% FS.
- Load Resistance: Minimum RL = (Usupply - 15V) / 0.02A, Maximum RL = (Usupply - 9V) / 0.02A.
- Load Influence: <0.05% FS.
- Complies with various EN standards for vibration, shock, emission, electrostatic discharge, irradiated RF, transients, surge, and conducted RF.
- Materials: Transducer and housing made of stainless steel (316L), seals made of Viton, cables available in PUR, FEP, PE.
- Includes accessories such as HART001 Cable Socket Connector.
- Various configurations available for pressure type, measuring range, process connection, electrical connection, output signal, accuracy, temperature range, and options for special oil filling and seals.
Catalog excerpts
Pressure and Temperature Transmitters ATM.1ST/T - High Precision Transmitter Customer benefits • High precision pressure and temperature sensor over the whole temperature range thanks to electronic compensation • Selectable pressure and temperature measuring range • Fast customization due to modular product design • Short response time suitable for dynamic pressure measurements
Open the catalog to page 1
Technical Specifications Pressure measuring range (bar) 0.1 ... 0.5, (1) Long term stability, (5) Accuracy, (3), (± % FS) Total Error, (4), (± % FS) 0 ... 70°C, (typ. / max.) -25 ... 100°C, (typ. / max.) (1) 50 mbar on request (2) Transducer (3) Zero based accuracy according to DIN-16086, incl. hysteresis and repeatability at ambient temperature (4) Total error including accuracy and temperature influences at maximum signal span (16 mA) (5) 1 year (typ. / max.), the long term stability can be improved by aging (burn-in) the sensor Temperature measuring range Standard, (1) Self heating, (5) Water,...
Open the catalog to page 2
Power supply Supply influence Minimum load resistance Maximum load resistance Load influence Circuit diagram Load resistance Qualifications Description Electrostatic discharge Radio sets, wireless phones Transients (burst) Motors, valves Frequency converters Physical specifications Materials Transducer Viton (standard) Typical interferences
Open the catalog to page 3
Accessories overview Cable Socket Connector Additional documents Operating and safety instructions Article number 10.88.0092
Open the catalog to page 4
Ordering information X. XXXX. XXXX. XX. XXX Type ATM.1ST/T Pressure type Gauge Absolute (vacuum) Sealed gauge Pressure measuring range 100 mbar ... 25 bar (1) Process connection G 1/2 M, probe Ø4 x 6.3mm, (Fig. 1) Electrical connection DIN-43650, with metal threaded part, demountable, IP 65 (Fig. 3), (3) FEP cable, (high temperature), black, IP 67 (Fig. 4), (4), (7) Customized connection Output signal 4 ... 20 mA (3 wire) Accuracy 1 2 Temperature range 0 ... 70°C compensated (allowed process temperature: -40 ... 125°C) -25 ... 100°C compensated (allowed process temperature: -40 ... 125°C) -40...
Open the catalog to page 5
Pressure Connections Electrical Connections Version for media temperature up to 125°C socket connector white +Vin -i-VinP yellow -i-VinT brown Pout Pout green Tout Tour Specifications may change without notice STS Sensor Technik Sirnach AG Rutihofstrasse 8, 8370 Sirnach, Switzerland 844 Route de la Caille, 74350 Allonzier la Caille, France STS Sensoren Transmitter Systeme GmbH Poststrasse 7, 71063 Sindelfingen, Germany Box 3942 | Warwick | CV34 9AE, United Kingdom Via Gesu 5, 20090 Opera (Milano), Italy
Open the catalog to page 7All STS Sensor Technik Sirnach AG catalogs and technical brochures
WATER & ENVIRONMENT6 Pages
INDUSTRY PRODUCT10 Pages
STS Products&Systems64 Pages
DL.WMS/GPRS/R8 Pages
Business competence brochure6 Pages
Accessories24 Pages
Industry Product Overview2 Pages
Product overview Water2 Pages
Product overview Industry2 Pages
DL.WMS/GPRS/R/SDI-128 Pages
- Pressure transmitter
- Analog pressure transmitter
- Level probe
- Liquid level sensor
- Pressure switch
- Pressure probe
- Membrane pressure transmitter
- Waterproof pressure transmitter
- Stainless steel pressure transmitter
- Relative pressure transmitter
- Analog level sensor
- Digital pressure transmitter
- Waterproof pressure switch
- Level transmitter
- Gas pressure transmitter
- Liquid level transmitter
- Liquid pressure transmitter
- Threaded pressure transmitter
- Process pressure transmitter
- Analog pressure sensor