ATM/NC Pressure transmitter for corrosive media

1 / 5 PagesView full catalog

ATM/NC Pressure transmitter for corrosive media

Product catalog summary

Customer Benefits:

The level transmitter is made of PVDF, providing excellent resistance to aggressive chemicals.
Optional features include overvoltage protection, reverse polarity, and short circuit protection.

Technical Specifications:

Pressure Measuring Range: 1 to 250 mH2O with overpressure up to 3 bar and burst pressure over 200 bar.
Accuracy: Less than 0.5% FS, with thermal shift and long-term stability specifications provided.
Temperature Range: Operating, process, and storage temperatures range from -5°C to 80°C.
Electrical Specifications: Power supply options include 9-33 V DC and 15-30 V DC, with various output signals available.

Qualifications:

Complies with EN 61000 standards for electrostatic discharge, irradiated RF, transients, and conducted RF.

Physical Specifications:

Materials include stainless steel, titanium, PVDF housing, and various seal options.
Weight is approximately 150 g.

Ordering Information:

Options for pressure type, measuring range, process connection, electrical connection, output signal, accuracy, temperature range, and seals are available.
Additional options include protective caps and humidity filter elements.

Catalog excerpts

ATM/NC Pressure transmitter for corrosive media-1

Chemical Resistant Submersible Level Transmitters Customer benefits • Chemical resistant level transmitter made of PVDF • This transmitter has an excellent resistance to aggressive chemicals • Optional overvoltage protection • Reverse polarity and short circuit protected

Open the catalog to page 1

ATM/NC Pressure transmitter for corrosive media-2

Technical Specifications Pressure measuring range (mH2O) 1 ... 5 Accuracy, (2), (± % FS) Accuracy, (2), (3), (± % FS) Thermal shift, (± % FS/°C) Zero point 0...70°C Zero point -25...85°C Span 0...70°C Span -25...85°C Long term stability, (4) (1) Transducer (2) Zero based accuracy according to DIN16086, incl. hysteresis and repeatability at ambient temperature (3)Only if diaphragm is made in titanium (4) 1 year (typ. / max.) Temperature range Operating temperature Process temperature Storage temperature Power supply Supply influence Current consumption Circuit diagram Load resistance Load influence...

Open the catalog to page 2

ATM/NC Pressure transmitter for corrosive media-3

Physical specifications Materials Transducer Stainless steel (316L / 1.4435) with teflon protection, titanium (Gr. 2) Viton (Standard), EPDM, Kalrez (1) Specification for a ATM/NC, copen, cable Accessories overview Additional documents Operating and safety instructions Article number 10.88.0092

Open the catalog to page 3

ATM/NC Pressure transmitter for corrosive media-4

Ordering information X. XXXX. XXXX. XX. XXX Type ATM/NC Pressure type Gauge Absolute (vacuum) Pressure measuring range 100 mbar...25 bar Process connection Open, TD in titanium (Fig. 1) Open, TD 316L with FEP foil (Fig. 1) Electrical connection PE cable, IP 68, black (2), (3) 4...20mA with surge protection 0...10 V DC with surge protection 0...5 V DC with surge protection Accuracy 6 5 0 Temperature range -5...50 °C compensated (allowed process temperature: -5...50 °C) -5...80 °C compensated (allowed process temperature: -5...80 °C), (5), (6) Option 1 Option 2 Option 3 Seals: Viton (standard)...

Open the catalog to page 4

ATM/NC Pressure transmitter for corrosive media-5

white H-Vin +Vin Specifications may change without notice. STS Sensor Technik Sirnach AG Rutihofstrasse 8, 8370 Sirnach, Switzerland 844 Route de la Caille, 74350 Allonzier la Caille, France STS Sensoren Transmitter Systeme GmbH Poststrasse 7, 71063 Sindelfingen, Germany Box 3942 | Warwick | CV34 9AE, United Kingdom Via Gesu 5, 20090 Opera (Milano), Italy

Open the catalog to page 5