Catalog excerpts
Highly flexible TStromagU Periflex® MVNT Disc Coupling A L R A I N D S T R I A L O I O N Stromag Periflex® VN Disc Coupling
Open the catalog to page 1Highly flexible Stromag Periflex® VN Disc Coupling Series overview: Stromag Periflex® Disc Couplings Periflex® VN / -VP…G Series Nominal torque range 160 – 63,000 Nm Periflex® VN / -VP…GB Series with antirotation stop Nominal torque range 160 – 63,000 Nm Periflex® VN…S Series Nominal torque range 160 – 8000 Nm 2 Periflex® VN / -VP…R Series; radial installations Nominal torque range 160 – 63,000 Nm Periflex® VN /-VP…W Series; shaft coupling Nominal torque range 160 – 63,000 Nm
Open the catalog to page 2All issues containing details on Stromag Periflex® Disc Couplings prior to this publication may no longer apply. We reserve the right to modify measurements and designs without prior notice. Stromag products conform to the quality standard under DIN ISO 9001. The Stromag Periflex® Disc Coupling concept 4 Instructions for the designer • Use in potentially explosive environments 5 • Classification rules Instructions on choosing the coupling size 6 Installation instructions and scope of delivery 7 Periflex® VN/-VP NR and Periflex® VN/-VP ECO ratings tables 8 Periflex® VN and...
Open the catalog to page 3Highly flexible Stromag Periflex® VN Disc Coupling The Stromag Periflex® Disc Coupling concept Stromag Periflex® VN couplings are highly flexible elastomer couplings with linear spring characteristics ideal for diesel engine drives. The Series covers the torque range 160 – 63,000 Nm. The external companion dimensions conform as standard to the flywheel connections under the SAE standard J620. The larger couplings are basically designed with metric flywheel connections. Stromag Periflex® VN coupling allows fast and simple connection of a flange, specifically a flywheel, to a shaft. Some...
Open the catalog to page 4Highly flexible Stromag Periflex® VN Disc Coupling Instructions for the designer The Stromag Periflex® VN coupling hubs are made of steel or ductile cast iron. The connection ring is made of aluminium. The disc tires consist of a steel or ductile cast iron angular ring with a volume of vulcanized elastomer. The variants of natural rubber (NR) can be used at temperatures of ‑50°C to +80°C. The variants of temperature resistant material (ECO) can be used at temperatures of -40°C to +120°C. In addition, ECO is resistant to ozone and oil. Damping work may cause the flexible element to reach...
Open the catalog to page 5Highly flexible Stromag Periflex® VN Disc Coupling Fail-safe device The Stromag Periflex® VN coupling is available with an fail-safe device. A rupture in the flexible element causes claws to intermesh, forming a torsionally rigid, backlash connection between the drive and output sides. Temporary emergency operation is possible with limited torque. The permissible torques and speeds must be calculated separately on the basis of torsional vibrations transferred via a torsionally rigid structure. Instructions on choosing the coupling size The static and dynamic characteristics of Stromag...
Open the catalog to page 6Highly flexible Stromag Periflex® VN Disc Coupling Installation instructions and scope of delivery The Stromag Periflex® VN coupling is fitted with a connection ring (1) that allows it to be bolted directly to the engine’s flywheel. The hub (3) of the disc tire (2) is secured to the machine with bolts (4). The drive and output sides are moved together to the prescribed distance (maybe blind installation), in this situation the tire’s teeth must engage over the entire length of the connection ring. The maximum displacements can be taken from the dimensions and ratings tables. Delivery of the...
Open the catalog to page 71) The values listed in the tables refer to the disc tire characteristics. 3) This value must be reduced by the temperature factor when the coupling temperatures are higher than 30°C. 4) Tolerances on the materials may be as high as ±15%. 5) PKV 60 value represents the damping power that can be absorbed over a period of 60 minutes. The damping power that can be absorbed permanently is PKVTO = 0,5 • PKV 60.
Open the catalog to page 91) The values listed in the tables refer to the disc tire characteristics. 3) This value must be reduced by the temperature factor when the coupling temperatures are higher than 30°C. 4) Tolerances on the materials may be as high as ±15%. 5) PKV 60 value represents the damping power that can be absorbed over a period of 60 minutes. The damping power that can be absorbed permanently is PKVTO = 0,5 • PKV 60.
Open the catalog to page 11Stromag Periflex® VN 183...430 810-00005 Size
Open the catalog to page 124 Vent bores offset by um 90° vers. Stromag Periflex® VN 283...433 B side
Open the catalog to page 144 Vent bores offset by
Open the catalog to page 15Stromag Periflex® VN 183...358 B side
Open the catalog to page 16Stromag Periflex® VN 183...430 Size
Open the catalog to page 184 Vent bores offset by um 90° vers. Stromag Periflex® VN 283...430 810-00009 Size
Open the catalog to page 204 Vent bores offset by um 90° vers.
Open the catalog to page 21Stromag Periflex® VN 283...433 Size
Open the catalog to page 224 vent bores offset by 90° Stromag Periflex® VN 283...433 810-00019 Size
Open the catalog to page 244 vent bores offset by 90° 810-00018 Stromag Periflex® VN 436...726 Size
Open the catalog to page 251) Dim. l can be modified by moving the connection ring within specified tolerances 2) at max. bore d and d2
Open the catalog to page 27Stromag Periflex®VP 433...726 Size
Open the catalog to page 30Highly flexible Stromag Periflex® VN Disc Coupling Stromag Periflex® VN coupling characteristics TKN The coupling’s nominal torque can be permanently transferred over the whole permitted speed range. It must be higher than the system’s nominal torque TN An application factor of 1.2 is recommended for the simple design of a drive system based exclusively on the nominal torque. TKmax The coupling´s max torque TKmax can be endured as a peak load and may not be exceeded by peak torques Tmax1 when the system is operating in normal, nonstationary mode. A system’s normal nonstationary modes are...
Open the catalog to page 32Installation space: enter required measurements in the diagram below
Open the catalog to page 34All STROMAG catalogs and technical brochures
-
Carbon Fiber Shaft
1 Pages
-
Stromag KMS...THC
1 Pages
-
Stromag Vector Couplings
12 Pages
-
4 BZFM Brake
16 Pages
-
NFF Brake
16 Pages
-
Clutches and Brakes
8 Pages
-
brakes type 600
2 Pages
-
Lever Switches, Serie HHEV
9 Pages
-
Geared Switches, Serie HGE
24 Pages
-
Geared Switches, Serie HEG
10 Pages
-
Determination of Clutches
24 Pages
-
Spidex®, Dentex®
28 Pages
-
Periflex® VN Disc Coupling
36 Pages
-
Disc Coupling
36 Pages
-
highly-flexible ring couplings
31 Pages
-
couplings for Cardan Shaft
34 Pages
-
Stromag: safety in motion
20 Pages
-
Two-in-one 1
4 Pages
-
Two-in-one 2
4 Pages
-
Wind Turbine Catalogue
7 Pages
-
Hydrid Clutches and Brakes
8 Pages
-
High Protection Brake Catalogue
16 Pages
-
Flexible Couplings
2 Pages
-
Highly-flexible TRI-R Couplings
31 Pages
-
Highly-flexible TRI Couplings
33 Pages
-
Highly-flexible GE Couplings
28 Pages
Archived catalogs
-
Electromagnetic Tooth Clutches
36 Pages
-
Driveshaft
44 Pages