Handhabungstechnik GmbH ROLLYX Rail profiles ■ Multifunction rail with additional runways Positioning stoppers internal & external Safety bolts for travel limitation Smooth-Running Aluminium Rail System

The ROLLYX aluminium rail system was developed as modular construction kit for the creation of track railways and X/Y light crane installations with optimal running properties and a payload range up to 3000 kg. By means of this kit overhead cranes can be construed in a simple and fast way. Thus, the spectrum ranges from a straight line between two workplaces of just a few meters of conveyance, over an area-wide transport with an easy and convenient guidance by hand, up to installations for automated operation. The ROLLYX rail system can be easily adapted to individual conceptional requirements....

SR 100 SR 150 SR 200 SR 250 SR 175M Standard rail Standard rail Standard rail Heavy-duty rail Multifunction rail ROLLYX rails are made of extruded multi-chamber precision aluminium of up to five-time stability gradation. Despite a low dead weight, highest bending strength and torsional stiffness is achieved due to the multi-chamber profile technique. The aluminium rails are natural-coloured hard-anodised and can be supplied up to 8 m length. Colour coatings and special lengths are available on request. Channels for fitted bolts - rail joiners Fastening groove for suspension T-slot for attachment...

The rail connection is a combined fitted bolt - screw joint, made of steel and aluminium. Fitted bolts help that running surfaces of rail ends, which shall be joined together, are accurately positioned relative to one another. With regard to the axial connection the screw jointing cares for a firm hold of the faces. Profile locking plates Each end of a rail track should be closed with a locking plate. Within the range of ROLLYX rail system this plate is made of aluminium and is secured with four screw dowel joints. The locking plate may not be used for travel limitation. A safety bolt should...

Buffer elements (as required) - Rubber buffer - Shock absorber Side guide rollers Aluminium base body Buffer elements (as required) - Rubber buffer - Shock absorber Ball-bearing plastic rollers Side guide rollers Suspension bolts for cranes and trolley frames ROLLYX trolleys are equipped with ball bearing plastic rollers. Side guide rollers prevent tilting of trolleys in the rail. An additional pair of support rollers is installed for applications which require additional support against raising up of rollers from the running surface. Crane bridge Y-axis Application example ROLLYX X/Y-System...

With regard to suspension of ROLLYX rails from ceiling constructions different variants are available. Besides the varied rail length selection, height adjustment can always be realised as well. Crane bridge stiffeners The connecting crossbar for double girder bridges causes a stiffening of the parallel running rail tracks, and is required from 3 m bridge span. Different versions of crane trolleys are provided. Depending on installation height, kind of application and payload, profile and rail gauge must be selected to match. Crane trolleys for manipulators consists of: - Trolley frame

Crane trolley for chain hoists with double rail consists of: - Trolley frame Pneumatic energy feeding Electric energy feeding inside of the runway inside of the runway Energy trolley Air hose: DN10 Energy trolley

Alternative energy feeding in C-rail- parallel to runway - for pneumatics and electrics Energy chain Switching elements Various application possibilities also require different circuits. Our technicians and constructing engineers develop just the right solution for each performance requirement. Handhabungstechnik GmbHm Crane way position switch The crane way selector switch (position switch) is available either in electrical or pneumatical version. They are used for pre-positioning, shutdown of traction drive or conveyor-belt switch-off.

Stop control trolleys Stop control trolleys cause an automatic stop of the trolleys in start-up position. A particular control is used for this trolley. Overrunning and rocking of the trolley during positioning process is advantageously prevented thereby, and thus it is functionally beneficial for the use of rope balancers and chain hoists. Brakes Brakes are used in order to stop the trolleys and to set them into a parking position. They can be used in X and Y-direction.

Friction drives When ROLLYX rail systems with excellent smooth-running properties are concerned, friction drives only offer an additional advantage for loads from 500 kg upwards. These travel drives are available in electric and pneumatic version. In addition a drive alignment subassembly can be provided. It works continuously and engages the approach of the friction drive automatically, while on the other hand, it automatically opens the driveway for positioning when disabled. Special characteristics of these drives are: ■ Stepless cross travel speeds ■ Rather noiseless travelling ■ Use with...

The ROLLYX rail system offers countless combinations, which offer a solution for rather any kind of application. We distinguish between X- systems and X/Y-sy stems. Profile locking plate For applications, travelling in X-direction only, a single rail runway can be used. In this way practical work with tool-trolleys, chain hoist, screwdriving technology, manipulators (YXO-MAT and PICO-MAT) is enabled up to payloads of 3000 kg. This appliance already is an X/Y-system and suitable to travel both directions.

Triple rail runway with double support crane bridge and crane trolley

More than 30 years development work made our handling devices become reliable tools in different branches of the industry. Whether a single device or the equipment of a complete assembly line is concerned - Intelligent ergonomics directly from Strodter! Chain hoist ■ Electric chain hoist 400V 3ph 50Hz ■ variable lifting height resp. „ERGOnomic“-control The rope balancer PICO-MAT TWIN is a hand-operated double rope manipulator with pneumatic balance control. With this device you can lift, turn, pivot or transport loads up to 100 kg. For a simple and stepless handling the loads are pneumatically...