BaleTainer®

BaleTainer®

BaleTainer®

Product catalog summary
Introduction
ITG GmbH, a full-service logistician, has optimized its internal logistics by implementing Strautmann's BaleTainer® for compacting cardboard packages. This system automates the process of creating marketable bales from cardboard waste, which are then transported weekly to a paper mill.

Specifications
The BaleTainer® is installed in-house below a duct and operates on a 2-shift basis. It features fully automatic processes for charging, strapping, and discharging bales. The machine applies a contact pressure of approximately 1,600 kN/m², achieving a bale density of up to 550 kg/m³. The system handles approximately 1,500 tons of cardboard annually.

Procedures
Previously, cardboard packages were manually transported, charged, strapped, and removed. The new system automates these processes, significantly reducing manual labor and increasing efficiency. Cardboard is automatically conveyed through a slide shaft into the press chamber, strapped with wire, and ejected as bales.

Benefits
The BaleTainer® offers high bale quality and operational safety, with a unique compaction principle that ensures high surface pressure and density. The feeding hopper spans three floors, allowing easy and direct filling. The system supports ITG GmbH's waste disposal efforts, making them more economical.

Customer Feedback
Gunter T. Zachau, project manager at ITG GmbH, praises the BaleTainer® for its exceptional bale quality, operational safety, and economic efficiency in waste disposal.

Conclusion
The implementation of the BaleTainer® has transformed ITG GmbH's cardboard waste management, enhancing logistics efficiency and reducing manual intervention.
See more

Catalog excerpts

BaleTainer®-1

Project report Compaction of cardboard packages at the full-service logistician ITG GmbH

 Open the catalog to page 1
BaleTainer®-2

ITG GmbH expands and optimises the internal logistics By services in the areas of transport, storage and commissioning in combination with comprehensive additional services the full-service logistician covers all areas of modern procurement, contract and distribution logistics. Strautmann's BaleTainer® is charged with cardboard packages from three floors via a duct and compacts them fully automatically to become directly marketable bales. Those bales are taken to a paper mill directly on a lorry every week.

 Open the catalog to page 2
BaleTainer®-3

- High degree of in-house logistics + Low degree of internal logistics - Manual charging Cardboard packages were transported from the colletion points on three floors to the bale presses. The press chamber was charged with cardboard packages manually. - Manual strapping As soon as the bales had been completed, was strapped manually. - Manual bale removal Bale removal had to be started manually. By means of a hydraulic bale ejector the bale was directly thrown onto a pallet. Via the charging duct the recyclable materials get into the BaleTainer® directly. The recyclable materials are conveyed...

 Open the catalog to page 3
BaleTainer®-4

"In the past, our experience with Strautmann was always good. Best bale quality, high degree of operational safety and fast service are the decisive factors. The BaleTainer® now tops it all: it makes waste disposal extraordinarily economic”, says Gunter T. Zachau, project manager with ITG GmbH. Cardboard Example: due to the comprehensive range of services different cardboard packages occur. □ Quality of cardboard packages: 1.04 □ Annual quantity: approx. 2,500 t Feeding hopper The feeding hopper extends to three floors and can be filled on each floor. The cardboard is thrown in and falls directly...

 Open the catalog to page 4

All Strautmann Umwelttechnik catalogs and technical brochures

  1. BrikPress

    4  Pages

  2. AutoLoadBaler

    4  Pages

  3. LiquiDrainer

    4  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.