STRAUB-PLAST-GRIP Ø 40.0 - 160.0 mm

Product catalog summary

Overview: The document is a technical manual for the STRAUB-PLAST-GRIP, a pipe coupling system designed for diameters ranging from 40.0 mm to 160.0 mm. It details the components, materials, specifications, and installation guidelines.

Components and Materials: The manual lists various components and their materials, including casings made of AISI 304, bolts of AISI 4135 or A4-80, bars of AISI 12 L 14 (galvanized) or AISI 304, anchoring rings of AISI 301/304, and optional strip inserts of AISI 316 L/PVDF. Sealing sleeves are available in EPDM and NBR, each suitable for different temperature ranges and media.

Sealing Sleeve Specifications:

EPDM: Temperature range from -20°C to +100°C, suitable for water, wastewater, air, solids, and chemical products.
NBR: Temperature range from -20°C to +80°C, suitable for water, gas, oil, fuel, and hydrocarbons.

Installation and Usage Notes:

Follow fitting and disassembly instructions.
Working pressure (PS) should consider application loads, with a test pressure of PS x 1.5.
STRAUB stiffening rings are required for HDPE and PP pipes.
Strip inserts are necessary for special applications.

Technical Specifications: The document provides a detailed table of specifications for various pipe diameters, including clamping range, working pressure, dimensions (B, C, DV, KV), torque rate, Allen head size, and thread specifications. Notably, the working pressure is consistently 16.0 bar across all sizes.

Additional Notes: The manual advises consulting the technical manual for actual outer diameters (OD) for IPS sizes in bold and notes that technical details are subject to change.

Catalog excerpts

Components / Materials Temp.: Medium: Temp.: Medium: Sealing sleeve EPDM Sealing sleeve NBR AISI 304 AISI 4135 AISI 12 L 14, galvanised AISI 301 / 304 AISI 316 L / PVDF Casing Bolts Bars Anchoring rings Strip insert (option) AISI 304 A4 - 80 AISI 304 AISI 304 AISI 316 L / PVDF -20°C up to +100°C all qualities of water, waste water, air, solids and chemical products -20°C up to +80°C water, gas, oil, fuel and other hydrocarbons Remarks: • Follow fitting / disassembly instructions • PS = Working pressure considering the application loads Test pressure = PS x 1.5 (for example industry, water supply etc.) • For the installation of pipes of pipes made of HDPE and PP, STRAUB stiffening rings are required • Strip inserts are required for special applications 1 Available in version W2 only For IPS sizes in bold see technical manual for actual OD Typing errors may occur. Technical details are subject to change

Open the catalog to page 1

STRAUB-PLAST-GRIP Ø 40.0 - 160.0 mm

STRAUB-PLAST-GRIP Ø 40.0 - 160.0 mm

Catalog excerpts

All STRAUB Werke AG catalogs and technical brochures