- Catalogs
- STRAUB Werke AG
- STRAUB-GRIP-L-FIRE-FENCE Ø 26.9 - 219.1 mm
STRAUB-GRIP-L-FIRE-FENCE Ø 26.9 - 219.1 mm
STRAUB-GRIP-L-FIRE-FENCE Ø 26.9 - 219.1 mm
- Components/Materials: The casing and U-bars are made from AISI 316 L / 316 TI, bolts from A4 - 80, anchoring rings from AISI 301, and optional strip inserts from AISI 316 L / PVDF.
- Sealing Sleeves: Available in EPDM, NBR, H-NBR (on request), and FPM/FKM, each with specific temperature ranges and compatible mediums.
- Temperature Ranges: EPDM (-20°C to +100°C), NBR (-20°C to +80°C), H-NBR (-20°C to +125°C), FPM/FKM (-20°C to +180°C).
- Medium Compatibility: Varies by sealing sleeve, including water, gas, oil, fuel, hydrocarbons, ozone, oxygen, acids, and chemical products.
- Follow specific fitting and disassembly instructions.
- Working pressure (PS) is determined by application loads, with test pressure being 1.5 times the PS.
- Pressure values are valid for radial rigid carbon steel pipes under static loads.
- Minimum wall thickness of pipes should be referenced in the technical manual.
- Strip inserts are required for special applications.
- The document includes a detailed table listing outer diameters (OD), clamping ranges, working pressures (PS), and other dimensions such as B, C, DV, KV, and torque rates for various pipe sizes.
- Typing errors may occur, and technical details are subject to change.
Catalog excerpts
Components / Materials Casing Bolts U-Bars Anchoring rings Strip insert (option) AISI 316 L / 316 TI A4 - 80 AISI 316 L / 316 TI AISI 301 AISI 316 L / PVDF Sealing sleeve EPDM Sealing sleeve NBR Sealing sleeve H-NBR (on request) Sealing sleeve FPM / FKM Temp.: Medium: Temp.: Medium: Temp.: Medium: Temp.: Medium: -20°C up to +100°C all qualities of water, waste water, air, solids and chemical products -20°C up to +80°C water, gas, oil, fuel and other hydrocarbons -20°C up to +125°C water, gas, oil, fuel and other hydrocarbons -20°C up to +180°C ozone, oxygen, acids, gas, oil and fuel (only with strip insert) 26.9 - 60.3 with single bolt OD [mm] Remarks: • Follow fitting / disassembly instructions • PS = Working pressure considering the application loads Test pressure = PS x 1.5 (for example industry, water supply etc.) • The pressure values are valid on radial rigid carbon steel pipes under static loads • For minimum wall-thickness of pipe, see technical manual • Strip inserts are required for special applications Manual 2012/01 For IPS sizes in bold see technical manual for actual OD Typing errors may occur. Technical details are subject to change
Open the catalog to page 1All STRAUB Werke AG catalogs and technical brochures
STRAUB Engineering6 Pages
Technical Manual Shipbuilding44 Pages
Technical Manual64 Pages
STRAUB Products10 Pages
