STRAUB-GRIP-L Ø 26.9 - 219.1 mm

Product catalog summary

Specifications:
The STRAUB-GRIP-L is designed for pipe diameters ranging from 26.9 mm to 219.1 mm. For diameters between 26.9 mm and 60.3 mm, a single bolt is used. The components are made from various materials including AISI 316 L / 316 TI for the casing and U-bars, A4 - 80 for bolts, and AISI 301 for anchoring rings. Optional strip inserts are available in AISI 316 L / PVDF.

Sealing Sleeves:
Different sealing sleeves are available based on temperature and medium requirements:

EPDM: Suitable for temperatures from -20°C to +100°C, compatible with water, waste water, air, solids, and chemical products.
NBR: Suitable for temperatures from -20°C to +80°C, compatible with water, gas, oil, fuel, and hydrocarbons.
H-NBR (on request): Suitable for temperatures from -20°C to +125°C, compatible with water, gas, oil, fuel, and hydrocarbons.
FPM / FKM: Suitable for temperatures from -20°C to +180°C, compatible with ozone, oxygen, acids, gas, oil, and fuel (only with strip insert).

Procedures and Recommendations:
Follow fitting and disassembly instructions. For IPS sizes in bold, refer to the technical manual for actual outer diameter (OD). Working pressure (PS) should consider application loads, with test pressure being 1.5 times PS. Pressure values are valid for radial rigid carbon steel pipes under static loads. Minimum wall thickness of pipes should be checked in the technical manual. Strip inserts are required for special applications.

Technical Data:
The document provides a detailed table with specifications for various pipe diameters, including clamping range, working pressure (PS), dimensions (B, C, DV, KV), torque rate, and thread specifications. For example, a pipe with an OD of 26.9 mm has a clamping range of 26.4 - 27.4 mm, a working pressure of 46.0 bar, and requires a torque rate of 5 Nm.

Catalog excerpts

Components / Materials Casing Bolts U-Bars Anchoring rings Strip insert (option) AISI 316 L / 316 TI A4 - 80 AISI 316 L / 316 TI AISI 301 AISI 316 L / PVDF Temp.: Medium: Temp.: Medium: Temp.: Medium: Temp.: Medium: Sealing sleeve EPDM Sealing sleeve NBR Sealing sleeve H-NBR (on request) Sealing sleeve FPM / FKM -20°C up to +100°C all qualities of water, waste water, air, solids and chemical products -20°C up to +80°C water, gas, oil, fuel and other hydrocarbons -20°C up to +125°C water, gas, oil, fuel and other hydrocarbons -20°C up to +180°C ozone, oxygen, acids, gas, oil and fuel (only with strip insert) 26.9 - 60.3 with single bolt OD [mm] Remarks: • Follow fitting / disassembly instructions • PS = Working pressure considering the application loads Test pressure = PS x 1.5 (for example industry, water supply etc.) • The pressure values are valid on radial rigid carbon steel pipes under static loads • For minimum wall-thickness of pipe, see technical manual • Strip inserts are required for special applications Manual 2012/01 For IPS sizes in bold see technical manual for actual OD Typing errors may occur. Technical details are subject to change

Open the catalog to page 1

STRAUB-GRIP-L Ø 26.9 - 219.1 mm

STRAUB-GRIP-L Ø 26.9 - 219.1 mm

Catalog excerpts

All STRAUB Werke AG catalogs and technical brochures