- Catalogs
- Strain Measurement Devices
- A115 Bubble Detector
A115 Bubble Detector
A115 Bubble Detector
- Noninvasive detection of air in liquid-filled tubes.
- Custom-calibration for bubble detection as small as 50% of the tube's inside diameter.
- Dry-coupling to tubing, eliminating the need for grease or acoustic coupling materials.
- Compatible with a range of tube materials, including rigid and soft plastics and rubbers.
- Integrated test function for easy verification.
- Mountable on custom panels with optional silicone gasket.
- Housing Material: Black ABS
- Supply Voltage: 3.3 - 5 VDC (5.5 VDC Max)
- Intended Tube: 3/32” Nominal OD
- Output Signal: TTL
- Response Time: 100μs
- Current Draw: < 4mA
- SMD8799: 18” cable with Molex connector to flying leads.
- SMD8800: 12” cable with Molex connectors on both ends.
- SMD8172-A115: Adhesive-backed silicone gasket for mounting.
Catalog excerpts
A115 Bubble Detector The A115 Bubble Sensor is part of the newest generation of off-the-shelf bubble sensors designed to detect bubbles noninvasively in 3/32” outside diameter tubing. Designed with our OEM Medical Device customers in mind, it features all the most requested features and options to streamline designs and optimize performance. The sensor includes our newest digital noninvasive ultrasonic bubble sensing technology to reliably detect bubbles in any liquid through a wide variety of rigid and soft tubing materials. Product Specifications Housing Material: Black ABS Supply Voltage (VIN): Intended Tube: Output Signal: Response Time: 100μs Test Pin: 10k Ohm pull-down resistor on sensor Current Draw: < 4mA Part Number · Detects air in liquid-filled tubes non-invasively · Bubble size can be custom-calibrated to detect bubbles as small as 50% of the tube inside diameter · Dry-couples to tubing (no grease or acoustic coupling material needed) · Functions out of the box with a variety of tube materials including rigid plastics (e.g. fluoropolymers), soft plastics, and rubbers · Integrated test function · Designed to easily mount to a custom designed panel with an optional silicone gasket (see accessories table/website for recommended mounting configuration) Optional Accessories SMD8799 Cable, 18” length, Molex 501330-0400 connector to flying leads SMD8800 Cable, 12” length, Molex 501330-0400 connector to Molex 501330-0400 connector SMD8172-A115 Adhesive-backed silicone gasket for A115 Bubble Sensor USA Strain Measurement Devices 55 Barnes Park North, Wallingford, CT 06492 [email protected] | (203) 294-5800 Medical Devices Chemical Processing Equipment Pharmaceutical Instruments Other OEM Products Food Processing Biotech analysis Europe Strain Measurement Devices Bury Road, Chedburgh, Bury St Edmunds IP29 4UQ [email protected] | +44 (0)1284 852 000
Open the catalog to page 1
Mounting features designed for #4-40 or M2.5 threaded inserts in bosses on mating panel Serial Number Legend SMD Part # Year Code Lot Number Unit Number Pinout Connector PN: MOLEX 5013310407
Open the catalog to page 2All Strain Measurement Devices catalogs and technical brochures
W100 0.45kg Scale2 Pages
B354 Pressure Sensor2 Pages
S1002 Pages
A3301 Page
A4301 Page
Archived catalogs
Strain Measurement Brochure2 Pages
- Force sensor
- Measuring machine
- Tension/compression force transducer
- Level limit switch
- Steel load cell
- Strain gauge force sensor
- Liquid level detector
- Level probe
- Liquid level sensor
- Stainless steel force transducer
- Pressure probe
- Gas detector
- Weighing force transducer
- Beam type force sensor
- Float level switch
- Platform balance
- Analog level sensor
- Compression force transducer
- Kilogram weighing scale
- Stainless steel level detector