*mydirectindustry

Catalogs
STRACK NORMALIEN
Cutting punches, cutting bushes - embossing stamps

Cutting punches, cutting bushes - embossing stamps

Product catalog summary

Specifications:
The document provides detailed specifications for cutting punches and ejector elements as per DIN ISO 8020. It covers materials like tool steel and high-speed steel (HSS), specifying hardness ratings in HRC. Various forms of cutting punches are described, including cylindrical and conical heads, and those with anti-rotation locks.

Materials and Standards:
Materials include tool steel and HSS, with grades such as 1.3343 and 1.2601. Standards referenced include ISO 8977 and DIN 9845, ensuring compliance with industry norms.

Procedures:
Installation instructions for embossing stamps are detailed, emphasizing correct form and material selection for durability and performance.

Recommendations:
Use cylindrical head punches where space allows for robust performance and longer lifespan. Trombone neck design punches are recommended for high stripping forces.

Tables and Data:
Tables provide measurements for components like cutting bushes and embossing stamps, specifying parameters such as diameter, length, and hardness.

Key Information:
Emphasizes selecting appropriate cutting punch form and material to minimize costs and maximize tool life. Notes on model updates for compliance with latest standards.

Specifications:
Discusses types of cutting punches and applications, including trombone collars for increased stripping forces and 60° conical heads for space constraints.

Materials:
Specifies materials for cutting punches, including WS, HWS, HSS, and ASP 23, each characterized by wear resistance and toughness.

Coating Methods:
Recommends coatings like CrN, TiN, TiCN, and TiAlN to enhance tool life by improving hardness and wear resistance.

Procedures and Recommendations:
Emphasizes vertical alignment, uniform cutting gaps, and use of hardened pressure plates. Discusses benefits of stepped cutting punches and spring-mounted guide plates.

Cutting Force and Gap:
Provides formulas and tables for calculating cutting force and gap, highlighting lubrication and sharpening to prevent tool damage.

Standards and Norms:
Notes transition from DIN 9845 to ISO 8977 for cutting bushes, with tables for standard cutting gaps based on material thickness and shear strength.

Conclusion:
Stresses quality in cutting punches and matrices to avoid repair costs, providing guidelines for material, coating, and fitting procedures to optimize performance.

Punch Models and Specifications:
Discusses various punch models, recommending cylindrical head punches for robustness and durability.

Material and Coating Systems:
Details materials and coatings used for punches, highlighting properties and applications for different stress levels.

Assembly and Alignment Recommendations:
Stresses proper alignment and consistent clearance to avoid excessive cutting forces and punch head embedding.

Punch and Die Clearance:
Discusses clearance impact on cutting force and quality, providing indicative values for die openings.

Cutting Force Calculations:
Provides formula for cutting force calculation, with considerations for minimizing extraction force and ensuring proper guidance.

Round Dies and Standards:
Notes transition to ISO 8977 standards for round dies, available in various lengths and profiles.

General Recommendations:
Recommends inclined or V-shaped cutting faces, proper lubrication, and timely re-sharpening to prevent breakage and burr formation.

Catalog excerpts

Cutting punches, cutting bushes - embossing stamps-1

SCHNEIDSTEMPEL, SCHNEIDBUCHSEN PRÄGESTEMPEL CUTTING PUNCHES, CUTTING BUSHES EMBOSSING STAMPS POINÇONS DE DECOUPE, MATRICES POUR TROU TAMPONS DATEUR AVEC GRAVURE EN RELIEF

Open the catalog to page 1

Cutting punches, cutting bushes - embossing stamps-2

Auswerferelemente, Schneidelemente Ejector elements, Cutting elements Eléments d’éjecteur, Eléments de découpage DIN 9861/1 DA SN 1820 DIN ISO 8020 A SN 1855 A-HSS www.strack.de DIN 9861 D 4.36 SN 1830 SN 1850 B-HSS 4.38 SN 1845 DA-HSS 4.40 SN 1850 DA-HSS 4.40 SN 1850 B-ASP DIN ISO 8020 E DIN ISO 8020 B DIN ISO 8020 F 4.42 SN 1857 E-HSS 4.43 SN 1860 B-HSS 4.44 SN 1862 F-HSS 4.41 SN 1890 4.41 DIN ISO 8020 BS/BR/BO Schneidstempel Sonderanfertigungen Cutting punches special models Poinçons de découpe fabrication spéciales 4.46 SN 1868 C-HSS 4.47 4.48 DIN 9861 D 4 SN 1842-HSS 4.50 SN 1841-HSS 4.51...

Open the catalog to page 2

Cutting punches, cutting bushes - embossing stamps-3

Auswerferelemente, Schneidelemente Ejector elements, Cutting elements k. Elements d'ejecteur, Elements de decoupage

Open the catalog to page 3

Cutting punches, cutting bushes - embossing stamps-4

Auswerferelemente, Schneidelemente Ejector elements, Cutting elements k. Elements d'ejecteur, Elements de decoupage www.strack.de .^^^^^^^M Cutting punches

Open the catalog to page 4

Cutting punches, cutting bushes - embossing stamps-5

Auswerferelemente, Schneidelemente Ejector elements, Cutting elements k. Elements d'ejecteur, Elements de decoupage

Open the catalog to page 5

Cutting punches, cutting bushes - embossing stamps-6

Auswerferelemente, Schneidelemente Ejector elements, Cutting elements k. Elements d'ejecteur, Elements de decoupage Cutting punches * nicht in Material D-ASP lieferbar can not be delivered in material D-ASP ne peut pas etre livre en materiel D-ASP can only be delivered in material peut seulement etre livre en material D-ASP en longueur 100

Open the catalog to page 6

Cutting punches, cutting bushes - embossing stamps-9

Auswerferelemente, Schneidelemente Ejector elements, Cutting elements Eléments d’éjecteur, Eléments de découpage Schneidstempel www.strack.de Cutting punches Poinçons de découpe A B L SN 1850 B-HSS SN 1850 B-ASP - A* Mat.: HSS (1.3343) / 62 ±2HRC B* L* Mat.: ASP 23 / 64 ±2HRC *nach Wahl des Bestellers *at customer’s option *au choix du client SN 1850 B-HSS-A-B-L SN 1850 B-ASP-A-B-L Klemmstück für Stempelaufhängung Clamping piece for punch suspensin 4 Piéce de raccord pour suspension du poinçon // 0,01 Mat.-Nr. 1.7131/ 60 ±2HRC R L1 a1 B/2 V SN 1890-A-B-L B -0,02 SN 1890- L2 L -0,2 L1 ±0,01 D1...

Open the catalog to page 9

Cutting punches, cutting bushes - embossing stamps-13

Auswerferelemente, Schneidelemente Ejector elements, Cutting elements Eléments d’éjecteur, Eléments de découpage www.strack.de 4 STRACK NORMA GmbH & Co. KG • Tel.: +49 (0) 23 51 / 87 01- 0 • Fax: +49 (0) 23 51 / 87 01-100 D 3002 03.2012 2.4.45

Open the catalog to page 13

Cutting punches, cutting bushes - embossing stamps-16

Auswerferelemente, Schneidelemente NORMAL IEN Ejector elements, Cutting elements k. Elements d'ejecteur, Elements de decoupage www.strack.de Schneidstempel Cutting punches Poincons de decoupe Beispiele fur Sonderanfertigungen. Examples of special models. Exemples de fabrications speciales.

Open the catalog to page 16

Cutting punches, cutting bushes - embossing stamps-17

Auswerferelemente, Schneidelemente Ejector elements, Cutting elements Eléments d’éjecteur, Eléments de découpage Anfrage / Inquiry/ Demande de devis Auftrag / Order / Bon de commande www.strack.de STRACK NORMA GmbH & Co. KG Königsberger Str. 11 58511 Lüdenscheid Tel.: 0 23 51 / 87 01-0 Fax: 0 23 51 / 87 01-100 E-Mail: [email protected] Firma / Company / Société Straße / Street / Rue Fotokopieren, ausfülle Ort / Town / Ville n und per Fax an un s. Please copy, fill in an d fax to us. Photocopier, remplir et nous retourner. Name / Nom Tel., Fax Auftrags-Nr. / Order No. / V/Réf. Dat. Mat.: HSS / ASP...

Open the catalog to page 17

Cutting punches, cutting bushes - embossing stamps-19

Auswerferelemente, Schneidelemente Ejector elements, Cutting elements Eléments d’éjecteur, Eléments de découpage Posaunenhalsstempel mit Abstreifstift Punch with trombone collar with stripper pin www.strack.de Poinçons avec collerrette de trombone avec goupille de déflecteur R h .2 ax m 64 ±2 HRC a d1h6 ~d1 d2 Rz 2,5 ,2 r -0 SN 1841-HSS- Mat.: HSS (1.3343) L1 +0,5 4 SN 1841-HSSd1-L1 d1 d2 r h a 6,0 71 / 80 / 90 / 100 9,0 10,0 4,0 1,5 8,0 11,0 12,0 4,0 1,5 10,0 14,0 15,0 4,0 1,5 13,0 17,0 15,0 4,0 1,5 16,0 20,0 15,0 4,0 1,5 20,0 Auf Anfrage auch mit abgesetzter Kontur lieferbar. L1 25,0 15,0 4,0...

Open the catalog to page 19

Cutting punches, cutting bushes - embossing stamps-23

Auswerferelemente, Schneidelemente Ejector elements, Cutting elements Elements d'ejecteur, Elements de decoupage www.strack.de .^^^^^^^M Centring elements Anlieferungszustand ohne Kontur Delivery condition without profile Etat de livraison sans profil

Open the catalog to page 23

Cutting punches, cutting bushes - embossing stamps-24

Auswerferelemente, Schneidelemente Ejector elements, Cutting elements k. Elements d'ejecteur, Elements de decoupage Polyurethane stripper Stripper force in [daN] at deformation of Force du devetisseur [daN] a la deformation de Thurst piece Piece recevant la pression

Open the catalog to page 24

Cutting punches, cutting bushes - embossing stamps-35

Auswerferelemente, Schneidelemente Ejector elements, Cutting elements Eléments d’éjecteur, Eléments de découpage www.strack.de Schneidbuchsen Cutting bushes Matrices pour trous Beispiele für Sonderanfertigungen. Examples of special models. Exemples de fabrications spéciales. 4 STRACK NORMA GmbH & Co. KG • Tel.: +49 (0) 23 51 / 87 01- 0 • Fax: +49 (0) 23 51 / 87 01-100 D 3002 03.2012 2.4.67

Open the catalog to page 35

Cutting punches, cutting bushes - embossing stamps-36

Auswerferelemente, Schneidelemente Ejector elements, Cutting elements Eléments d’éjecteur, Eléments de découpage www.strack.de 4 2.4.68 STRACK NORMA GmbH & Co. KG • Tel.: +49 (0) 23 51 / 87 01- 0 • Fax: +49 (0) 23 51 / 87 01-100 D 3002 03.2012

Open the catalog to page 36

Cutting punches, cutting bushes - embossing stamps-39

Auswerferelemente, Schneidelemente Ejector elements, Cutting elements Eléments d’éjecteur, Eléments de découpage Prägestempel www.strack.de Tampons dateur avec gravure en relief Embossing stamps L 5 0,25 d3 8 9 10 567 1112 1 4 0,25 1 2 d2H7 23 4 L2 L3 1 2 L1 +0,2 Z 5203 Montageanweisung Z 5202 Installation instruction 1. Instruction de montage 2. 1 2111 1 2111 2 2 1 1 4 32 4 32 5 756 5 1. - Fully mount embossing stamp, - Mark arrow direction 2. - Unscrew inner part Z 5201/ Z 5208, - Rotate sleeve Z 5202 into position for marking 3. - Srew in inner part Z 5201/ Z 5208, - Check position 7 65 6...

Open the catalog to page 39

Cutting punches, cutting bushes - embossing stamps

Cutting punches, cutting bushes - embossing stamps

Catalog excerpts

All STRACK NORMALIEN catalogs and technical brochures