Catalogs >
Storm Interface >
AXS Series S40

AXS Series S40
2Pages

Catalog excerpts

Toughened Access Control Solutions AXS S40 – iCLASS SE® PIN / Contactless Reader This integrated keypad and contactless reader is rated for continuous outdoor use in exposed, unsupervised locations. Featuring genuine HID® iCLASS SE®, Seos®, contactless technology, this access control keypad offers enhanced security by dual authentication. Authorised access through a secured door or barrier can be gained by entry of a valid PIN and presentation of an authorised 13.56 MHz contactless card, token or Seos® compatible NFC device. • ACCESSIBILITY: Moving tactile keytops, on a standard 19mm pitch, with home key tactile idents, ensure accessibility for those with sensory impairment. Operational temperature: Water and dust resistance: Humidity: UV resistance: • SECURITY: A requirement for both knowledge of a PIN and possession of an associated card (dual authentication) creates an enhanced level of security at primary points of access. Impact resistance: Shock and vibration resistance: Operating Voltage: Operating Current: Includes genuine HID technology: Accreditation protocols: Default security level V1 iCLASS®, iCLASS SE®, Seos®, Mifare™, DESFire™ 13.56 MHZ Wiegand 26 bit, 32 bit, 34 bit or 40 bit PIN data: 4 or 8 bit burst RX/TX frequency: Data output format: CE, European Radio Directive & FCC 47CFR15B IEC62559-2 UL294 NRTL Certified • COMPLIANCE: UL294, FCC47CFR15B, CE, RoHS2, Radio Equipment Directive. • RELIABILITY: AXS S40 and S40i PIN/Contactless readers feature HID® iCLASS® contactless technology encased within a robust, weather resistant STORM AXS keypad. Laboratory tested and field proven, these UL294 certified keypad / readers provide the most durable and reliable system interface. • COMPATIBILITY: Supports multiple technologies including iCLASS SE® Seos®, standard iCLASS®, MIFARE™, and MIFARE DESFire™. • FLEXIBILITY: Dual technology readers can expedite access by accepting just the wave of a card or PIN entry only. The host system can demand both PIN and card to achieve elevated security. -35ºC to +65ºC (dry) EN60529 IP65 5% to 95% RH non-condensing Suitable for continu

Open the catalog to page 1

5V Power Input BEEP input (active low) DATA HOLD input (active low – holds card data only) TAMPER (normally closed) 0V 0V RED LED input (active low) GREEN LED input (active low) 12V Power input Wiegand Data 1 output Wiegand Data 0 output TAMPER (normally open) Either the 12V or 5V power inputs can be used. If both power supplies are connected, the 12V input takes precedence. Toughened Access Control Solutions Storm AXS-S40 keypad connection details (Fixing hardware, sealing gaskets and comprehensive installation instructions are included) Sealing Gasket Keypad Optional Privacy Shield...

Open the catalog to page 2