Tough, water resistant, industrial grade polymer keypads These keypads feature tactile keys with ‘snap-on’ key caps. Keytop graphics can be easily customised by the location of thin plastic tiles under ‘snap-on’ transparent keycaps. Once snapped into place the tamper resistant keycaps encapsulate and protect the keytop graphics. The keypads are designed for use in harsh industrial environments. These keypads are also available with integral white light LED illumination for use in dark or partially lit locations. Available in standard 4,12 and 16 key formats. Performance Operational key life: Operational temperature: Storage temperature: Humidity: >2 million cycles per key -20 ºC to +60 ºC -20 ºC to +70 ºC 5%RH to 95%RH non-condensing ETSI 300 019 5M3 IP65 When fitted to a suitable surface 5J 50Mohms (min) 500V a.c. (60 secs) 24V 50mA (excluding keypad illumination current) 5V +/- 10% at 13mA per key Vibration and shock: Water and dust resistance: Impact resistant: Insulation resistance: Breakdown voltage: Max Operating voltage: Max Operating current: Compliance This device is designed to meet: • EU RoHS • EU Low Voltage Directive • ESD: Up to +/- 15kV air discharge, +/- 7.5kV contact discharge • WEEE Directive compliant Additonal Information (downloads available at www.storm-interface.com) • Keytop graphics can be easily configured / customised • Supplied with numeric legend tiles (Set A). A selection of additional key legend tile sets are available • IP65 – sealed for use in wet or dirty environments • Impact, shock and vibration resistant to survive in demanding industrial applications • Available with integral, white light LED illumination (Storm 720GFX-i version) Installation instructions including product dimensions CAD files (dxf, dwg) Test data and reports Selection of keytop character tile sets and coloured tiles Keytop character tile sets and coloured tiles Storm 450 and 450i Series USB Interface USB Cable for use with USB Interface Under panel fitting kit • Keys are arranged on an X-Y matrix circuit terminated via a 0.1” pitch, square pin, male connector with an integral locking ramp • Directly compatible with the Storm 450 and 450i USB keypad Interface For more information & to order: White light illumination Storm 450 Series USB Interface 4500-00 Storm 450i USB Interface 4500-10 with audio control USB Cable (USB A to 4500-01 90º USB mini-B) Under panel fitting kit 7200-FK02 www.storm-interface.com Whilst every effort is made to ensure details are correct at time of print, specifications are subject to change without notice. Designed & produced by NIK Design [email protected] Storm Interface products include technology protected by international patents and design registration. All rights reserved. Storm is a trademark of Keymat Technology Ltd Storm Interface is a trading name of Keymat Technology Ltd