720 GFX-i Series Sealed and Rugged Keypads These tough, water resistant keypads feature moving, tactile keys with a responsive ‘over-centre’ action. Keytop graphics can be easily customized by the use of legend tiles under ‘snap-on’ transparent keycaps. Once snapped into place the tamper resistant keycaps encapsulate and protect the keytop graphics. These keypads have integral white light LED illumination for use in dark or partially lit locations. Connection Details Connection Details for 4 Key Keypad CONTACT CONNECTIONS 7 6 5 4 3 2 1 (As viewed from rear ol keypad) 1 A G C D KEY LOCATION {As viewed from front ol keypad) White Colour Tiles and Set A Legends are included; Set A Legends comprises :-1 2 3 4 5 6 7 8 9 0 + = x * * # . ^ ^ | ac i/o ent ce/e Additional Legends ( Tile sets B,C,D,E,F,) & Colours (White, Grey, Red, Green, Blue, Yellow) are available Electrical Contact Bounce Contact Resistance Insulation Resistance Breakdown Voltage Switch Rating Connection Illumination ( Pin 1 is 0 V) 5 ms (max) 100 ohms (max) 50 Mohms (min) 500 V AC (max 60 secs.) 24V DC 50mA (max) X-Y Matrix 5 V DC ± 10 % ,13mA per key Mechanical Operational Life Keytop Travel Actuation Force Connector Mating Connector 2 million cycles (min) per key 1.4mm nominal 150 grams nominal 0.1"pitch, gold plated square pin Molex 2695 Series or equivalent Performance Operational Temp Impact Rating Vibration/Shock Water / Dust sealed -20°C to 60°C 5 J ETSI 300 019 5M3 IP65 (when fixed to suitable panel ) Accessories 4200-00 RS232 Encoder Interface Module 4500-10 450 USB Encoder Interface Module with Buzzer and Illumination Control Colour & Legend Tiles & Replacement Seals go to www.storm-interface.com Dimensions Overall sizes See following page Panel Cutout DXF Download .dxf and .stp files from Suface Model STEP www.storm-interface.com Storm is a trademark of Keymat Technology Ltd. Storm Interface is a trading name of Keymat Technology Ltd. Storm Interface products include technology protected by international patents and design registration. All rights reserved

720 GFX-i Series Sealed and Rugged Keypads Install the keypad onto the surface of a panel as follows : Fit the seal to the rear of the keypad  Place the keypad onto the panel and fit the self locking nuts to the studs on the back  Recommended tightening torque 50Ncm Front and Back View : 4 way Front and Back View, 12 way Front and Back View, 16 way All panel dims in mm. Corner Rads all M3 Whilst every effort is made to ensure details are correct at time of print, specifications are subject to change without notice www.storm-interface.com Storm is a trademark of Keymat Technology Ltd. Storm...