Catalogs >
Storm Interface >
450 Series USB Encoder

450 Series USB Encoder
1Pages

Catalog excerpts

USB 2.0 Keypad Encoder This self-contained device is ready to use. It can be easily attached to the rear surface of most Storm keypads to provide connectivity and communication with USB compatible host systems. Factory configured for standard numeric data entry, this versatile device can also be user programmed to output alternative key codes; making the 450 Series Encoder the ideal keypad interface for most applications. Features • Direct connection to keypad via integral 0.1” pitch, square pin, female connector (included) • Connection to host system via cable fitted with USB Mini-B male connector (supplied separately) • Integral cable tie anchor points to secure USB cable Compliance (designed to meet) • • • • • EU RoHS EU Low Voltage Directive EMC: Emissions and Immunity: FCC part 15 class A EN55022, EN55024 ESD: Up to +/- 15kV air discharge, +/- 7.5kV contact discharge • WEEE Directive compliant • Generic keyboard (HID) device – no additional drivers needed • Factory configured to encode telephone or calculator format numeric keypads • Output code table can be customised using the USB Configuration Utility (available for free download from www.storm-interface.com) Operational temperature -20ºC to +60ºC Storage temperature -20ºC to +70ºC Humidity 10% to 90% non-condensing Vibration and shock ETSI 300 019 5M3 Insulation resistance 50Mohms (min) Breakdown voltage 500V a.c. (60 secs) Operating voltage 5V +/- 5% (USB) Operating current 20mA (excluding keypad illumination current) • 450i version includes an integrated power supply and provides colour and brightness control for keypad illumination (where fitted) • 450i version features a piezo sounder for optional key press confirmation or status signal 24mm • Simple connection via a USB Mini-B socket • Compact, self contained form factor Compatible with most Storm 4, 12 and 16 key format keypads (including Storm 700, 720,1000, 2000, 3000, GFX and PLX product series) For more information & to order: Accessories Part No.s • USB cable fitted with 90º angled Mini-B male connector (to encoder) and USB-A male connector (to host system). • Optional encoder configuration software (free download) Whilst every effort is made to ensure details are correct at time of print, specifications are subject to change without notice. 4500-SW01 Designed & produced by NIK Design nik@nikdesign.co.uk Storm Interface products include technology protected by international patents and design registration. All rights reserved. Storm is a trademark of Keymat Technology Ltd Storm Interface is a trading name of Keymat Technology Ltd

Open the catalog to page 1