*mydirectindustry

Catalogs
Storm Interface
2200 Series - Rugged Trackballs

2200 Series - Rugged Trackballs

Product catalog summary

Overview: The document provides technical specifications and installation instructions for the 2200 Series Panel-mount Trackballs, designed for industrial and hostile public environments. These trackballs offer smooth and precise cursor control and are available in vandal-resistant and robust versions.

Specifications:

Trackball Size: 38mm panel-mount.
Vandal Resistant Version: Features a stainless steel retention ring and a coated steel ball with a mirror finish, compliant with 10J BS EN 60068-2-75: 1997.
Robust Version: Features a phenolic resin ball in black.
Sealing: IP65 when stationary, IP54 when rotating.
Operating Temperature: -20°C to +60°C.
Connectivity: Automatically configures for USB or PS2.
Electrical: Supply voltage of 5.0V dc ±10%, with a supply current of 15mA maximum.
Mechanical: Tracking force of 50g nominal, ball speed up to 250 rpm, operational life of 10 million revolutions.

Installation:

Prepare a plate with a hole for a 43.0mm bezel and M3 x 40mm studs on 52.5mm centers.
Fit sealing gasket and secure with washers and Nyloc nuts, ensuring a maximum torque of 40Ncm.
Connect switches to connector P1 and use a jumper to enable both buttons as left click if required.

Environmental and Material Details:

Seal Material: PTFE with low friction fill.
Vandal Plate: Stainless steel (not included in the robust version).
Humidity: 95% Rh max, non-condensing.

Accessories: Cables for PS2 and USB connections are available separately, along with trackball units featuring either a black phenolic ball or a coated steel ball.

Additional Notes: The trackball is designed to work with resident drivers and does not require additional software. It is constructed to withstand hard use, abuse, and vandalism, making it suitable for challenging environments.

Catalog excerpts

Rugged cursor control for industrial and hostile public environments • 38mm panel-mount trackball provides smooth, responsive and precise cursor control • Vandal resistant version features a stainless steel retention ring and a coated steel ball (mirror finish) (10J BS EN 60068-2-75: 1997) • Robust version features a tough phenolic resin ball (black) • Sealed against the ingress of liquids & dust to IP65 when ball is stationary (IP54 when rotating) • Operating temp: -20oC (dry) to +60oC • Robust chassis designed to provide secure under-panel fixing for maximum resistance to hard use, abuse and vandalism • On-board encoder automatically configures to provide either USB or PS2 connectivity • Two ‘click keys’ (not supplied) can be connected directly to the on-board encoder • USB and PS2 cables for connection to host system are available separately 2200 Series Panel-mount Trackballs www.storm-interface.com Storm Interface products include technology protected by international patents and design registration. All rights reserved.

Open the catalog to page 1

Panel-mount trackballs for industrial and public environments 25 60 Connector Pinout Details Pin Button PS2 / USB Connections Output (P1) Connections (P3) 1 0V D- / Data 2 Button 1 (left) D+ / Clock 3 0V Test Only 4 Button 2 (right) Power +5V 5 0V Ground 0V 6 Button 3 (middle) Not used Electrical Supply Voltage 5.0V dc ±10% Switch Debounce 30ms rising/falling Supply Current 15mA maximum Resolution 150 pulses, 600 counts/revolution Mechanical Tracking Force 50g nominal any direction Ball Speed 250 rpm maximum Operational Life 10 million revolutions (min) Mounting Angle within 45o from horizontal...

Open the catalog to page 2

2200 Series - Rugged Trackballs

2200 Series - Rugged Trackballs

Catalog excerpts

All Storm Interface catalogs and technical brochures

Archived catalogs