Water Deionizer System
2Pages

{{requestButtons}}

Catalog excerpts

Water Deionizer System - 1

Water Deionizer System™Maximize battery performance with pure water from the tap The Water Deionizer System™ is one of a family of Lean Battery Room products from Philadelphia Scientific. It saves money in your warehouse or DC by eliminating waste and increasing productivity. Hard water in your water supply may be causing poor battery performance. Metallic impurities in water can poison the battery, affect cell voltages and increase self-discharge, all of which can result in shortened battery run time and reduced battery life. Not only does this waste money in your operation, but time as well. The traditional method to avoid water impurities is to use distilled water, an expensive and inconvenient proposition. Using deionized water is a simple and effective way to maximize battery life. Easy to use • Comes with everything you need to make pure water from the tap • Operates at full-line pressure to dispense pure water directly from the deionizer *Capacity varies with purity of incoming water. See table on reverse side Quick cartridge replacement requires no tools 20-ft output hose allows maximum watering flexibility and convenience Optional Watering Gun lets you fill a battery directly from the deionizer Exclusive battery-operated purity light • Dual color light indication signals when it’s time to change the cartridge - Green light means water quality is OK - Red light means it is time to change cartridge - No light means batteries need to be changed • Includes 2 D-cell batteries that will last for 2 years • No need to mount near AC power source - Keeps electricity and water separate and your employees safe

Open the catalog to page 1
Water Deionizer System - 2

Water Deionizer System™ Technical Information A mounting plate with hose hanger is provided for easy A single cartridge will produce an average of 600 gallons installation. The cartridge has standard hose fittings and of purified water. The amount will vary with the quality of connects in seconds to the input and output hoses with the incoming tap water — from as much as 1,500 gallons quick-connect couplings. No plumber or maintenance to as little as 250. Most battery manufacturers recommend department is required. Cartridge replacement takes that water should have no more than 50 parts per...

Open the catalog to page 2

All Storage Battery Systems catalogs and technical brochures

  1. AT10 Series

    12 Pages

  2. SBS-4815CT

    2 Pages