Stationary Battery Systems and Test & Monitoring Equipment
56Pages

Stationary Battery Systems Test & Monitoring Equipment

Storage Battery Systems, LLC (SBS) has been providing Power Solutions™ since 1915. SBS strives to provide superior products and service while maintaining consistent quality and continuity. SERVICES SBS will design and size your system per IEEE standards based on your specific requirements. SBS can provide the following services using fully-trained and experienced personnel, ensuring fast completion and high quality: •• Install, set up and test new stationary battery systems; decommission and recycle old stationary battery systems •• Provide preventative maintenance services for stationary...

 Stationary Batteries 1–6 Flooded Lead Acid Batteries • 20 year low maintenance designs 7–8 Nickel Cadmium Batteries • For extreme applications 9–19 • Valve Regulated Lead Acid Batteries Compact design and sealed = little/no maintenance Pg. 1–6  Racks, Spill Containment & Enclosures 20–22 • Standard and Seismic Battery Racks 23–24 • Spill Containment Systems  Chargers 29–31 • Float Chargers 32 Portable Maintenance Chargers •  Test and Monitoring Equipment 33–36 • Digital Hydrometers / Density Meters 37–38 • Battery Resistance Tester 39–46 • Constant Current DC Load Banks 47–48 • Hydrogen...

STT Series Low Maintenance Tubular Flooded Batteries OPzS 6 & 12 Volt Blocks (55–330 Ah) SBS has been selling tubular lead-selenium vented batteries for nearly 20 years. SBS was the first company to actively introduce this technology to the US market. The combination of the tubular positive plates and the lead selenium/ low antimony alloy provides the best possible combination in lead acid plate technology. The battery world favors tubular positive plates for flooded, gel and AGM applications. STT batteries are manufactured in accordance with OPzS DIN 40736 standards. Lead Selenium/Low...

Option: taller posts available upon request (shown below) With cap, .4" of exposed post for testing Without cap, 1.1" of exposed post for testing Shown with and without removable protective caps Technical Data OPzS DIN Std. 30736 Electrolyte (Gallons) Short Circuit Current (Amps) FLOODED BATTERIES Performance Data Constant current discharge in Amperes to 1.75 V/cell at 77° F Part No. STT12V50 Intercell-connector cables Jumper cable(s) Flip-top flame arrestor vent caps No-oxide grease Cell numbers Brass wire brush Utility funnel Installation & Operation Manual Insulated flexible intercell...

STT Series Low Maintenance Tubular Flooded Batteries OPzS 2 Volt Cells (110–3,585 Ah) SBS has been selling tubular lead-selenium vented batteries for nearly 20 years. SBS was the first company to actively introduce this technology to the US market. The combination of the tubular positive plates and the lead selenium/low antimony alloy provides the best possible combination in lead acid plate technology. The battery world favors tubular positive plates for flooded, gel and AGM applications. STT batteries are manufactured in accordance with OPzS DIN 40736 standards. Lead Selenium/Low Antimony...

Technical Data Part No. STT2V100 Electrolyte # of Short Circuit Current (Gallons) Poles (Amps) 1.2 Constant current discharge in Amperes to 1.75 V/cell at 77° F Part No. Intercell-connector cables Jumper cable(s) Flip-top flame arrestor vent caps No-oxide grease Cell numbers Brass wire brush Utility funnel Installation & Operation Manual Flip-top, easy-fill, flame arrestor vent caps FLOODED BATTERIES Performance Data Insulated flexible intercell connectors standard. Optional accessories on pages 5 and 6. SBS reserves the right to change specifications and designs without notice....

Bi-Directional Recombination Vent Plug For Stationary Flooded/Vented Batteries Significantly reduces/eliminates watering intervals and increases safety in poorly-ventilated areas Principle of Operation Operation of lead acid batteries results in the electrolysis of water. Electrolysis reduces the amount of water in the electrolyte, which in turn requires the battery to be watered more frequently, increasing maintenance requirements. Hydrogen and oxygen are also naturally created as part of this process and these gases can accumulate and become explosive. RECOMBINATION VENT CAPS The SBS...

Battery System Accessories Hydrometers and Accessories Part No. Hydrometer with glass float (1.100–1.320 scale) Hydrometer holder with drip cup Thermometer w/SG correction factor table (-20° to 130° F) 6 ft. lifting strap (for P/Ns STT2V100 through STT2V490) 8 ft. lifting strap (for P/N STT2V600 and larger) STT Solid Intercell Connectors Description Solid intercell connector for STT12V50/100 - 3.5" x 1" Solid intercell connector for STT12V150 - 4.25" x 1" Solid intercell connector for STT6V200 - 5.5" x 1" Solid intercell connector for STT6V250/350 - 8.5" x 1" Solid intercell connector for...

Pocket Plate NiCd Batteries Flooded Nickel Cadmium Cells (8–1680 Ah) Nickel Cadmium pocket plate batteries are the most reliable and rugged batteries available today. They can withstand, to a great extent, any type of abuse like overcharge, deep discharge, even accidental reverse charge, and can be stored in any state of charge. Pocket plate batteries are manufactured in 3 series (L, M, and H) based on their performance capabilities. They are available in 1.2V single cells (KP-Series)and in 1.2V, 2.4V and 3.6V multi-cell blocks (KB-Series). SBS’s pocket plate batteries are supplied with the...

HV Series Valve Regulated Pocket Plate NiCd Batteries Ultra Low Maintenance Nickel Cadmium Cells (7–1680 Ah) Valve regulated pocket plate batteries were designed to meet the needs of applications requiring the traditional high reliability of nickel cadmium pocket plate cells without the need to top-up with water. The VRPP battery works on the oxygen recombination principle and therefore has a much reduced water consumption. The level of recombination of these cells is 85–95%. Normal vented type cells will have only a 30–35% recombination efficiency. When the VRPP cells are properly float...