Catalog excerpts
Arga Battery Monitor Portable Monitor Battery Voltage, Ground Faults and Alarm Outputs ARGA BATTERY MONITOR The Arga Battery Monitor Portable from Electroswitch is designed to be portable and self-containted for monitoring battery voltage, ground fault detection and alarm outputs in the field. A LED display identifies alarm conditions in addition to audible alarms. Easily calibrate and set alarm thresholds through the front panel menu. Alarm functions: battery voltage, ground fault detection, AC power loss, ripple voltage, ripple current, high impedance and predictive corrosion detection. Remote monitoring and reporting is ideal for multiple and distant locations. The Arga Battery Monitor Portable supports Serial DNP3.0, Modbus and RS485 communications. Adjustable alarm threshold set points High / low battery voltage alarms ± Ground fault detection with alarm AC charger power loss High accuracy ± 0.2 VDC Open cell alarm Remote Monitoring and Reporting • Serial DNP3.0, Modbus, RS485: 2-wire standard, 4-wire optional • 4 dry contact alarm outputs • Analog current outputs (standard 4 to 20 mA) Additional Options Standard Outputs 50–180 VDC, 3VA (for 125 V battery) 100–360 VDC, 5VA (for 250 V battery) 36–72 VDC, 3VA (for 48 V battery) 30.83 KΩ ± 1% from each bus to ground (for 125 V battery) 60.50 KΩ ± 1% from each bus to ground (for 250 V battery) 15 KΩ ± 1% from each bust to ground (for 48 V battery) 0 to ± 199.9 VDC in 0.6" bright red LED digits and decimal point. Accuracy is ± 0.2 VDC (125 VDC model). Alarm relays are Form C contacts Relay 1: + ground fault Relay 2: - ground fault Relay 3: high battery voltage Relay 4: low battery voltage, open battery, loss of AC to charger Digital: DNP3.0, Modbus Analog: 4~20 mA Contact Rating Standard Part Numbers 50-1000-125A for 125 VDC installations 50-1000-250A for 250 VDC installations 50-1000-48A for 48 VDC installations Battery Input • Optional predictive corrosion detection alarm • Optional handheld ground fault detector · Handheld unit with on / off and volume adjust switch · LED and audible indicators for detected ground faults Ground Resistors Voltage Indication Handheld ground fault detector Other Arga Products Single-function digital meters Panel Mount Battery Monitors Voltage, current and frequency transducers
Open the catalog to page 1All Storage Battery Systems catalogs and technical brochures
-
AT10 Series
12 Pages
-
Attach-A-Puller
4 Pages
-
MTC Battery Power Change
8 Pages
-
SBS-CH4 Methane Gas Detector
2 Pages
-
AT30 Series (3-Phase)
12 Pages
-
The Power of Change
5 Pages
-
Motive Power Product Line
4 Pages
-
Water Deionizer System
2 Pages
-
Stationary Battery Systems
56 Pages
-
Test and Monitoring Equipment
24 Pages
-
Power Mobility Cart PMC-R3SK
2 Pages
-
Power Mobility Cart PMC-L2
2 Pages
-
Power Mobility Cart PMC-L1
2 Pages
-
Power Mobility Cart PMC-J5
2 Pages
-
SBS-3510 Digital Hydrometer
1 Pages
-
SBS Wireless Modules
2 Pages
-
SBS-1110S load bank
2 Pages
-
SBS-1230S load bank
2 Pages
-
SBS-8400 load bank
4 Pages
-
SBS-4830S load bank
2 Pages
-
SBS-4815CT
2 Pages
-
Battery Management System
2 Pages
-
SBS-H2 Hydrogen Gas Detector
2 Pages
-
PMC-J5 POWER CART
2 Pages