Double Layer Taper Technical Features: Production of double side tapes from single Pre-defined programs for different output double layer tapes; side tapes. Detection of finished single layer tapes; Definition of double layer tape’s length; Easy tape replacement, by opening a cover; Flexibility: Pre-defined programs to produce different configurations of double tapes Productivity: High reel speed One double tape produced in less than 30 seconds High Connectivity User-friendly interface to define finish product characteristics. Touchscreen, USB, network connection, etc. + Cost Effective: Production of double tapes at a fraction of the cost of commercial double tapes The DLT- Double Layer Taper, is a workbench taping machine to produce double layer tapes from 2 single layer tapes. The use of double layer tapes in the taping process of wire harnesses has many advantages, being the most important the fact that the glue will not stick to the wires, allowing free movement and flexibility of the cables. The machine allows to produce double tapes with different configurations, stored in pre-defined programs. It is possible to define the overlap of tapes, the diameter of tapes and the desired length of the final tape. It also allows to process tapes with different widths and to adjust the speed of reeling. Technical Data: Single tape widths: Inner core single tape: 230 VAC @ 50 Hz - 1 IEC standard male socket Single tape length: Double tape widths: Inner core double tape: Average linear reel speed: OPER ATIONS CENTER: ZONA INDUSTRIAL DE C A STELO BR ANCO RUA D, LT. 120, MOD. A1 6000 -790 C A STELO BR ANCO - P ORTUGAL Controlled Process: Detection of finished single layer tapes Definition of number of layers of double tape TEL: +351 27 2 327 253 EMAIL: INFO @STSHIELD.COM WEB PAGE: W W W. STSHIELD.COM Options: Inner Core Mandrel P/N: 08-08-0001