STÖGER Leightweight Solutions
20Pages

AUTOMATED SCREWDRIVING AND FEEDING TECHNOLOGY

Overview Our solutions for your automated process STÖGER blind rivet nut setting system (BMS) For blind rivet nuts and blind rivet studs STÖGER flow drill system (FSF) For flow drilling screws STÖGER wire thread screwing system (DGS) For 100 % correct feeding and screwing STÖGER Spatz Pick & place screwdriving robot with automatic tool change Automatic feeding units Bowl and step feeder STÖGER monitoring system (SMS) For targeted and efficient process monitoring

STÖGER blind rivet nut setting system (BMS) For blind rivet nuts and blind rivet studs The process can be monitored 100 %. Whether in transfer systems, turntable systems, on positioning systems or robot systems, the BMS can be used in almost unlimited ways. The tool-free changing of the tension screw in 10 seconds also guarantees minimum downtimes and maximum use. Process reliable, powerful and economical – the compact blind rivet nut setting system including force-displacement measurement assembles blind rivet nuts and blind rivet studs fully automatically in cycle times of 5-9 seconds....

STÖGER flow drill system (FSF) For flow drilling screws Developed for automotive production, the highly efficient FSF connects lightweight materials of different thicknesses - stationary or on robots. Thanks to the patented STÖGER Angel Offset Compensation (AOC), angular misalignment at the tool center point is prevented. By means of the cylinder positioned directly above the insertion tool, the axial movement and thus the force is applied centrally via the joining element without leverage. High dynamics due to low weight and compact design allow optimum access to difficult joining...

STÖGER wire thread screwing system (DGS) For 100 % correct feeding and screwing When high cycle times and process reliability are required, the STÖGER wire thread screwing system (DGS) is the right choice. The torque, angle of rotation and tightening depth control takes over the quality guarantee and each tightening process is completed in 3-5 seconds. The use of a torque sensor provides reliable data for digital process monitoring, which can be collected, fed into the STÖGER Monitoring System and evaluated. Specially designed for series production, the wire thread inserts are fed and...

STÖGER Spatz Pick & place screwdriving robot with automatic tool change One device as a 360° solution. The Spatz combines the multitude of different screwdriving applications with just one tool. Thanks to the intelligent control, it automatically and independently changes the tool, grips and positions the parts to be processed. No matter whether it is picking up and assembling components, screwing in different screws, setting balls or pins. With 15 different screwdriving programmes in the standard version, it opens up completely new possibilities in the automation industry. The Spatz can be...

Automatic feeding units Bowl feeder Robust and efficient. Thanks to its precise “microthrow technology”, not only screws but almost all geometries such as nuts, rivets, rings, caps or pins can be fed in the correct position and separated with our bowl feeder. The transport speed can be adjusted at any time via the integrated frequency control unit. In addition, extras such as rail type, content level control or measuring devices enable sorting and orientation individually adapted to the respective fastening element. Another plus point: the service life. Since all parts that come into...

Automatic feeding units Step feeder are particularly protected and there is significantly less friction. This results in fewer particles and coated screws can also be fed without any problems. In combination with a particle sluice, the step feeder from STÖGER AUTOMATION is the optimal solution when a high degree of technical cleanliness is required in the application. When it comes to technical cleanliness in feeding, the step feeder from STÖGER AUTOMATION is the first choice. Here, feeding takes place on the basis of the proven conveying principle and sorting in the correct position takes...

Stöger monitoring system (SMS) For targeted and efficient process monitoring With the intelligent monitoring system, you not only control all STÖGER devices within an automation process reliably and efficiently, you can also evaluate, record and save all process-related data at any time. In this way, the process history can be displayed quickly and easily and projects can be mapped completely digitally. This offers enormous optimisation potential for future planning. Furthermore, thanks to the possibility of external signal processing and the individual expandable and programmable inputs...

STÖGER AUTOMATION GmbH Gewerbering am Brand 1 82549 Königsdorf Germany Phone +49 8179 997 67-0 info@stoeger.com