PE Planetary Gear Unit
6Pages

ServoFit® PE planetary gear units New technology standard for applications in automation and robotics

With motor adapter for universal motor mounting … Specially designed for typical applications in automation and robotics Servo drives are used for many different applications. This results in a variety of torque and backlash requirements for the gear units. Whatever these requirements may be, power density, endurance and noise level are also high priority factors. STÖBER developed the new ServoFit® gear unit series for this requirement profile. Section: ServoFit® PE4 two-stage planetary gear unit Monobloc housing for two-stage planet gear set for mounting to standard servo motors The...

Monobloc housing, ultracompact with integral motor mounting system The new single-piece housing type for single and two stage versions is optimized for the mounting of standard industrial servo motors. The integral, zero-backlash clamp coupling gives maximum mounting convenience. It takes barely a minute to adapt a motor. The precise centring of the servo motor prevents mounting errors. A single clamping screw produces the interference fit. A thermal expansion feature is integrated. ServoFit® PE2 single-stage planetary gear unit ServoFit® PE3 single-stage planetary gear unit ServoFit® PE4...

or as a compact servo geared motor Section: SMS PE_EZ planetary geared motor Fully integrated, high-rigidity compact solution, particularly in combination with short design EZ motors SMS PE planetary geared motor All PE gear unit models are also available as SMS PE servo geared motors. A modified gear unit version allows the synchronous servo motors from STÖBER to be mounted directly without a coupling. The motors in the EZ, ED and EK series are used in this case. In combination with the new, equally compact EZ synchronous servo motor in particular, extremely short and therefore relatively...

ServoFit® servo gear unit system NEW ServoFit® PE planetary gear unit Versatility for uncompromising design The ServoFit® product range, with its numerous coaxial and right-angle servo gear units, offers unusually wide adaptability for many different servo functions. All the units have high-quality helical gearing, which gives them unrivalled running smoothness and backlash stability. In some cases the gear units can be combined to form multistage versions. The most important ServoFit® system data: Backlash: up to 1 arcmin Gear ratios: from 3 – 680 Accelerating torque: 19 – 22 000 Nm

STÖBER offers consistent solutions Note on the design of axes and drives As a system supplier STÖBER has its own complete product range for digital drive technology. The MC6 motion controller uses the CODESYS programming software to keep up with the trend towards open systems in the world of automation. For optimum axis design, it makes sense to focus primarily on the gear units or geared motors. A useful aid is the design software SERVOsoft which you can download from the STÖBER website (PRODUCTS > Software/Download > SERVOsoft). The STÖBER service system comprises 38 expert partners in...