Fibershield®-S

Product catalog summary

Product Description: Fibershield®-S is a textile fire protection curtain designed to navigate around corners, allowing for rectangular and polygonal floor space closures with angles between 30° and 150° without support elements. It can form closed polygon shapes or open systems that close against walls using special guide rails. The curtain features a spring-loaded closing strip for a tight seal and operates without external energy via the 'Gravigen' drive system, ensuring closure for over 90 minutes.

Specifications:

Type: Textile fire protection curtain
Protection Goals: EI with fire load free zone, EW 90, EI with sprinklers
Fabric Options: Ecotex 1100 A2, Heliotex
Fire Load Free Zone: Protex/Ecotex (EI 30/60/90min for 100/150/200 cm), Heliotex (EI 30/60/90min for 20/30/50 cm)
Verification: IBS 08062416
Closing Direction: Top to bottom
Closing Cycles: C1

System Design: The system includes components such as smoke detectors, casing, side guides, tubular motor, fabric, closing element, coil, control module, and manual release. The system length varies based on fabric type and dimensions.

Fabric Dimensions:

Ecotex 1100 A2: Width < 50 m, Drop length < 3 m (490 mm x 125 mm) or > 3 m - ≤6 m (490 mm x 225 mm)
Heliotex EW 90: Width < 50 m, Drop length < 2.2 m (490 mm x 125 mm) or > 2.2 m - ≤2.5 m (490 mm x 225 mm) or > 4.5 m - ≤6 m (490 mm x 450 mm)

Closing Strips: Available in standard and special versions, with options for light spots or light strips.

Casing Options:

Standard Casing: Open or closed with dimensions h = from table, d = 290 mm, t = 490 mm
Special Casing EI: Open or closed with dimensions h = 240 mm, d = 560 mm, t = 600 mm

Guide Rails: Designed for open polygons with dimensions a = 117 mm, b = 278 mm.

Catalog excerpts

Data sheet Fibershield®-S The space creating textile fire protection curtain that leads around the corner Product description Fire protection that leads around corners: The floor space of the closure can be realised in a rectangular and polygon-shape with angles between 30° and 150°. No support elements are required despite the corner design. In addition to a closed polygon shape, open systems can also be realised that close against the wall by installing special guide rails. A spring-loaded closing strip presses tightly against the ceiling and provides a proper closure. The fire protection curtain can be closed without any external energy by means of the 'Gravigen' drive system that is included as standard. The Fibershield-S complex allows for complex sealing geometries to be realised, while also complying with the requirement of closing off a space for more than 90 minutes. Type Textile fire protection curtain Achievable protection goals EI - with fire load free zone • EW 90 • EI - with sprinklers Fabric Ecotex 1100 A2 • Heliotex Fire load free zone Protex/Ecotex: EI 30/60/90min Verification Closing direction Closing cycles

Open the catalog to page 1

Data sheet Fibershield®-S System width Drop length (AL) t 1 = Smoke detector 2 = Casing 5 = Fabric 6 = Closing element 9 = Control with operating unit 10 = Manual release 3 = Side guids 7 = Coil SL = System length 4 = Tubular motor 8 = Control module

Open the catalog to page 2