Fibershield®-E

Product catalog summary

Product Overview: Fibershield®-E is an economical textile fire protection curtain known for its high degree of standardization. It features the 'Gravigen' drive system, allowing it to close without external energy, eliminating the need for fire-resistant cables. The system supports up to 10,000 motor cycles and can achieve various classifications depending on the fabric type used. It is suitable for large fire protection curtain systems, achieving at least class C2.

Equipment Options: The system can be equipped with a safety contact strip and a spring-loaded closing strip.

Type and Protection Goals: The curtain is a textile fire protection type, with achievable protection goals of EI with a fire load-free zone and EI with sprinklers. The fabrics used include Heliotex and Ecotex 1100 A2.

Fire Load Free Zone: Heliotex offers EI 30/60/90min with zones of 20/30/50 cm, while Protex/Ecotex offers EI 30/60/90min with zones of 100/150/200 cm.

Verification and Standards: The system is verified under several codes (e.g., UB III/B-06-005) and classified according to DIN EN 13501-2 for fire resistance (E 30, E 60, E 90, EW 30, EW 60).

System Design: The system includes components such as a smoke detector, casing, side guide, fixing bracket, fabric, closing element, tubular motor, control module, control with operating unit, and manual release.

Classification and Dimensions: The system supports classifications like E 90 / EW 30 with Ecotex 1100 and EW 90 with Heliotex, with system widths ranging from ≥ 1.1 m to ≤ 3 m and drop lengths up to 3 m.

Installation Options: The casing can be installed via wall mounting, suspension mounting, or ceiling mounting.

Guide Rails: The guide rails are available in several configurations (80 K, 80 KB, 80 KN) with dimensions a = 80 mm, b = 60 mm, and special dimensions aN = 85 mm, bN = 70 mm.

Catalog excerpts

Product description Type standardisation Textile fire protection curtain High degree of standardisation and thus economical shielding system with "Gravigen" drive system, i.e. closing without external energy, so that no fire-resistant cables are required. 10.000 motor cycles are possible. Different classifications achievable through different fabric types. Large fire protection curtain systems at least class C 2. Equipment options: Safety contact strip, spring-loaded closing strip from top to bottom E 30 • E 60 • E 90 • EW 30 • EW 60 • classified according to DIN EN 13501-2 C2 Fire load free zone Heliotex: EI 30/60/90min 20/30/50 Achievable protection goals EI - with fire load free zone • EI with sprinklers Closing direction Fire resistance Fabric Heliotex • Ecotex 1100 A2

Open the catalog to page 1

Data sheet Fibershield®-E Classification Fabric System width (SB) drop length (AL) t h (Special sizes on request - technically feasible up to a width of 7m (Ecotec 1100) or 6m (Heliotex)) 4 = Fixing bracket 8 = Control module 1 = Smoke detector 2 = Casing 3 = Side guide 5 = Fabric 6 = Closing element 7 = Tubular motor 9 = Control with operating unit 10 = Manual release

Open the catalog to page 2

Data sheet Fibershield®-E Standard Special Spring-loaded closing strip Casing installation options Wall mounting Suspension mounting Ceiling mounting

Open the catalog to page 3

Data sheet Fibershield®-E

Open the catalog to page 4

Fibershield®-E

Fibershield®-E

Catalog excerpts

All STOBICH FRANCE catalogs and technical brochures