STL_Produktkatalog
8Pages

Your Reliable and Competent Partner for Complex Sensor Systems Digital Magnetometer DM-Series Ultra High Resolution Digital Data Acquisition DX-Series Mobile and Stationary Electric and Magnetic Multi Influence Measurement System Earth Magnetic Field Simulator Deperming Systems Signature Analysis & Deperming Software Magnetic and Electrical Calibration Systems STL Systems AG CH-8274 Tagerwilen Switzerland Office Germany: STL Systems AG Max-Stromeyer-Str. 116 D-78467 Konstanz Germany www. st l. system s

DM–series Digital Magnetometer The DM-005, D-020, DM-050 and DM-060 Digital Magnetometers combine STL’s 32-bit resolution low noise data acquisition system, state-of-the-art low noise fluxgate sensors, and STL’s data acquisition software. The complete and miniaturized three-axes magnetic field measurement system uses an Ethernet based data acquisition system for over 1000 simultaneously triggered magnetometers. The DM–series covers a range from ±80 µT to ±1 mT in different noise levels. Highlights Low power consumption Very low noise, large dynamic range and high linearity Digital temperature...

Mobile and Stationary Electric and Magnetic Multi Influence Measurement System STL supplies mobile and stationary electric and magnetic signature underwater measurement systems. Three or more multi influence sensor platforms are connected to a base station via underwater hub by a single cable used for power and data transmission as well as for deployment and recovery. The analogue electric sensors are formed by UEP Carbon electrodes followed by ultra lownoise isolation preamplifiers and a 3-axes low-noise fluxgate. In addition the system can be equipped with acoustic, seismic and environmental...

Earth Field Simulator German Navy Earth Magnetic Field Simulator and Deperming Systems STL offers Earth Magnetic Field Simulator (EMFS) and Deperming Systems as well as Cage Type Deperming Systems tailored to the specific requirements of the customer. The EMFS of the German Navy situated in Lehmbek demonstrates STL’s capability in this field. Due to the increasing Navy‘s wide operational area in national and international missions, the threat by mines and torpedoes with magnetic igniter increases. Therefore, it is essentially important that the Navy has the capability and the feasibility to...

Overrun Deperming and Measurement Range System The Overrun Deperming and Measurement Range (ODMR) is a system dedicated to reduce the magnetic signature of ferromagnetic surface vessels and submarines. It allows a magnetic treatment to control the permanent magnetic signature of the ships in such a way that the ships magnetic signature is minimized. The deperming efficiency depends on the individual class of vessel undergoing treatment, the magnetic behaviour of the steel used, the building process and the magnetic history of the vessel and the operational area with respect to its vertical...

Deperming Underwater Construction Due to different project experiences STL has as well the capability to provide the underwater construction according to own layout of the deperming system, the cable weight with respect to the existing seabed. In the following there is an example of possible underwater construction with a quantity of cables up to 100 km. Typical example of Underwater Construction of Deperming and Measurement System Cage Type Deperming System The next generation of earth field simulators will contain the combination of measurement system together with deperming system to...

MMI of Analysis & Deperming Software Signature Analysis & Deperming Software The signature analysis software allows the extraction of the permanent and induced magnetic moment from the recorded data. Based on these data, the deperming settings are calculated. The analysis also allows the prediction of the vessel’s signature at any target location on earth. During deperming an alternating field is applied to the overrunning ship. The amplitude and frequency are dependent on the vessel type and adjusted to the maximum deperming efficiency. The below figures show examples of the existing MMI of...

Your Reliable and Competent Partner for Complex Sensor Systems STL Systems AG C H-8274 Tagerwilen Switzerland www.stl.systems Office Germany: STL Systems AG Max-Stromeyer-Str. 116 D-78467 Konstanz Germany Tel.: +49 7531 892 888 - 0 About STL STL is specialized in solving complex and demanding technical challenges by high technology system approaches used for naval and industrial applications. STL excels in the ability to combine specific requirement of discerning customers with various sensor influences, field generating systems and sophisticated data processing using STL's flexible...