E-type frame Technical specifications liftrunner( Tugger train trailer/trolley C-type frame

E-TYPE FRAME TECHNICAL SPECIFICATIONS This specification sheet only gives the technical figures for the standard trailer. Different dimensions, additional equipment etc. (if listed in the offer) could give different figures.

3 E-type frame. Independent E-type frame. The tugger train can be operated with 2 to 5 E-type frames (max. loading capacity of the complete train 4 t). Depending on the connected direction, the trailers can be loaded from the left or from the right side. Wheels. - teel cast rims with 200 mm diameter. S - ow-noise, enduring polyurethane faces. L - quipped with stainless steel axles. E Frame. - igh directional stability, also at high speeds and when braking. H - ick-up of trolleys with different sizes and of different types. P - ser-friendly unloading with little force by depressing a foot lever...

C-TYPE FRAME TECHNICAL SPECIFICATIONS This specification sheet only gives the technical figures for the standard trailer. Different dimensions, additional equipment etc. (if listed in the offer) could give different figures. Minimum width of working aisle depending on the length of the train

5 C-type frame. The tugger trains can be operated with up to 4 C-type frames. The four-wheel concept with four steered wheels allows passing over ramps with high directional stability. Depending on the connected direction, the trailers can be loaded from the left or from the right side. Wheels. - teel rims with 365 mm diameter. S - Low-noise SE-tyres fitted as standard. - quipped with stainless steel axles. E Frame. - igh directional stability, also at high speeds and when braking. H - ick-up of trolleys with different sizes and bulk load carriers P - lexible positioning of the frame arms allows...

SPECIFICATIONS TROLLEYS AND C-/E-TYPE FRAMES Euro trolley 1/1 standard version Euro trolley 1/1 high Standard trolleys are compatible with E- and C-type frames, available in various dimensions according to the requirements of the transported material. - 4 x swivel rollers, 2 of which with brakes, diagonally positioned. - 3 Polyamide rollers for low rolling resistance. - Load capacity per roller: 350 kg. - Higher load capacities. - Plug-on push bars. - 4 x 90 0 swivel wheel lock for easy positioning of the trolley with heavy loads. - Ball bearings for permanently low friction. - Foot brake with...

7 STILL liftrunner® concept. - rolleys are pushed into the trailer on floor level T (no lift device required). - or travelling the trolleys are hydraulically or pneumatically lifted so F that the trolley wheels are not in contact with the floor. - he towing tractor (CX-T, R06 or R07) is fitted with an integrated T hydraulic system or an air compressor to lift the E- or C-type frames (not for independent E-type frames). Efficiency. - asy operation of the tugger train with only one person resulting in E high specific transport capacity of the operator. - ow tare weight of the E-type frames. L -...

@ Your contact STILL Materials Handling Ltd. Berzeliusstraße 10 Aston Way, Leyland D-22113 Hamburg Lancashire PR26 7UX Telephone: +49 (0)40/73 39-2000 Telephone: +44 (0)1772 644300 Telefax: +49 (0)40/73 39-2001 Telefax: +44 (0)1772 644303 [email protected] [email protected] For further information please visit: For further information please visit: www.still.de www.still.co.uk Tugger Train Elements EN 10/12 TD Subject to technical modifications. STILL GmbH