@ Technical Data Pallet Rack Pallet rack

PALLET RACK TECHNICAL DATA 16 Anti-push through guard 15 Depth stay 14 Rear panel grid 13 Chipboard 11 Fire protection base 10 Grating + shelf grill Racking stanchions and crossmembers 1 The racking stanchions made from special profiles are punched in a 50 x 50 mm pattern. Each 2 racking stanchions have their framework profiles bolted to an upright. Different profiles and material thicknesses are used depending on the shelf loads. 2 The crossmembers with welded on hangers connect the racking uprights and form a racking bay. The crossmembers are secured against lifting out by a securing pin. Floor...

Fitting facilitated Example: A new hanger joint for our heavy duty racking guarantees easier fitting and improved statics. The uprights themselves represent a bolted system, whose height and depth can be extended or modified with the construction kit system. Loading figures - prerequisites Crossmember profiles for shelf loads up to 5,000 kg Crossmembers • The stated shelf load is taken to be uniformly distributed over the whole crossmember pair or shelf base. • The permissible centre sag is max. L/200 of the crossmember length. • The stated shelf load only applies in conjunction with our heavy...

STILL Materials Handling Ltd Aston Way Leyland Preston PR26 7UX Tel.: +44 (0)845 603 6827 Fax: +44 (0)1772 454668 STILL Materials Handling Ltd Marsh Barton Trading Estate Exeter EX2 8RU Tel.: +44 (0)1392 435151 Fax: +44 (0)1392 824328 [email protected] For further information please visit: www.still.co.uk STILL is certified in the following areas: Quality management, occupational safety, environmental protection and energy management. Racking EN 12/15 Subject to technical modifications.