Vertical order picker

In accordance with VDI guidelines 2198, this specification applies to the standard model. Alternative tyres, mast types, ancillary equipment, etc. could result in different values. Telescopic - mast, Load centre c = 400 mrr Telescopic - mast, Load centre c = 400 mm Triplex - mast, Load centre c = 400 mm

4 EK 11 L/EK 12 L STANDARD EQUIPMENT. Driver’s cab. - Ergonomic driver’s cab, ideal for order picking, with shock Hydraulics. - The tried and tested proportional valve technology together absorbent mountings and elegant overhead guard. Non-slip shock- with modern efcient 3-phase drive technology is a guarantee absorbent oor with rubber mat and integral dead-man switch. of particularly sensitive movements at maximum power and - Multifunctional operating panel, for use at alternate ends, with display panel for functional status, service information, operating hours, height display, special functions;...

5 Automatic guidance. - The driver can concentrate fully on his work because within the Additional equipment. racking the mechanical or contactless automatic guidance takes - Automatic braking at end of aisle, various designs. over the job of steering. - Hoist cut-outs. - With mechanically guided trucks the straight-ahead position of the drive wheel is ensured automatically. - Various drive cut-outs. - Cut-out strip on the overhead guard. - Guidance, mechanical or inductive. Auxiliary lift. - When order picking, the pallet is brought to the most favourable depositing height. - Thanks to matched...

6 EK 11 L/EK 12 L STANDARD EQUIPMENT Better motivation means better performance. Technology as a service. The driver and his working environment inuence order picking The modern, simple and performance-optimised technical design performance. STILL helps him/her to achieve 100% by providing supports the driver and subordinates itself to the needs of order a mobile workplace with optimal working conditions. The EK 11 l picking. Thus all movements are provided with adjustable ramp and EK 12 l models are equipped as standard with OPTISPEED, the functions for maximum acceleration, retardation and...

Your contact STILL GmbH Berzeliusstraße 10 @ D-22113 Hamburg Telephone: +49 (0)40/73 39-2000 Telefax: +49 (0)40/73 39-2001 [email protected] www.still.de/EK EK x.x HHe 09/11 TD Subject to technical modications. For further information please visit: