Catalogs >
STILL >
Drive-in and Flow-through Racks

Drive-in and Flow-through Racks
6Pages

Catalog excerpts

@ Technical Data Drive-in and Flow-through Racks Drive-in rack Flow-through rack

DRIVE-IN AND DRIVE-THROUGH RACKS Longitudinal girder Horizontal cross bracing Rack post Hooked or bolted carriers with pallet rail Vertical cross bracing Guide rail with entry guards Drive-in racks from STILL are designed as drive-in or drive-through racks. Drive-in racks are loaded and unloaded from one side only. Drive-through racks can be accessed from both sides. 3. Vertical cross bracing in every third field 4. Max. pallet weight 1 500 kg 5. Channel length up to 15 pallets (special length on request) 6. Max. load per row 24 000 k

Open the catalog to page 2

Drive-through rack Rack posts The rack posts made from special profiles are components of the proven STILL pallet rack. Shape and material thicknesses of the profiles depend on the channel load. Two posts are interconnected by cross bars to form a rack support. The rack supports are fastened to the floor by respective anchors. The type of the anchors used depends on the height of the rack and the quality of the floor. Spacers connect the rack supports at fixed distances and stabilise the construction. Longitudinal girders and horizontal cross bracings The posts of the drive-in and...

Open the catalog to page 3

Components Hooked carriers with pallet rail The carriers are hooked into the holes of the C-type profile and locked with a safety pin to prevent unintended lifting. The heights of the channels can be set individually in steps of 50 mm for each level. The carriers hooked in for each channel make the system very flexible allowing later modifications. The pallet rails are bolted onto the carriers. The slanted vertical faces of the rails ensure secure placement of the pallets. Guide rails with entry guards Optionally, the channels can be fitted with guide rails and entry guards. These are very...

Open the catalog to page 4

Components Planning parameters for drive-in and flow-through racks Please consider the following parameters when planning drive-in and flow-through racks. Pallet without load hangover Pallet with load hangover Load carriers a) Dimensions of the load carrier including overhang. b) Load weight (max. 1 500 kg). c) Height of load carrier including load min. 100 mm (stack/retrieval cycle). Truck specifications Width of truck, overhead guard version, lateral guide rollers and width of the mast must be checked. Maximum width of the truck is 950 mm (75 mm safety distance on each side). Special...

Open the catalog to page 5

STILL Materials Handling Ltd Aston Way Leyland Preston PR26 7UX Tel.: +44 (0)845 603 6827 Fax: +44 (0)1772 454668 19 Hennock Road Marsh Barton Trading Estate Exeter EX2 8RU Tel.: +44 (0)1392 435151 Fax: +44 (0)1392 824328 info@still.co.uk For further information please visit: www.still.co.uk STILL is certiﬁed in the following areas: Quality management, occupational safety, environmental protection and energy management. Drive-in rack EN 12/15 Subject to technical modifications. STILL Materials Handling

Open the catalog to page 6