@ Technical Data Cantilever Rack Cantilever rack

CANTILEVER RACK TECHNICAL DATA (2) (3) (4) Cantilever racks are not standard racks, but customer-specific solutions. Any size and loading is possible. (1) Rack uprights with support foot (3) Cross bracing (2) Cantilever arms (4) Longitudinal ties (1) Rack uprights with support foot - Single- or double-sided design - Size and design depend on the desired load and the static requirements - Perforation up to the highest measured shelf level - Standard foot with holes for anchoring to floor, profile corresponds to upright profile Height matrix - For simple adjustment of bay heights - Standard...

(2) Cantilever arms - Thickness of IPE profile is calculated according to length and loading - Bolted construction - Bumper protection is fitted to each cantilever arm as standard - with hole to accept roll protection For very light or small items, cantilever arms of rectangular tube can be supplied. (3) Cross bracing - Flat steel with adjustable clamp pivots for longitudinal reinforcement of the rack - Normally loaded, fitted to every fifth or sixth bay; at least one crossbrace per rack - For rack units over 4000 mm high, double fitment at the level (4) Longitudinal ties - Angle steel profile...

STILL Materials Handling Ltd Aston Way Leyland Preston PR26 7UX Tel.: +44 (0)845 603 6827 Fax: +44 (0)1772 454668 19 Hennock Road Marsh Barton Trading Estate Exeter EX2 8RU Tel.: +44 (0)1392 435151 Fax: +44 (0)1392 824328 [email protected] For further information please visit: www.still.co.uk STILL is certified in the following areas: Quality management, occupational safety, environmental protection and energy management. Kragarmregal EN 12/15 Subject to technical modifications. STILL Materials Handling