■ This specification document is for pressure gauges manufactured by: STIKO, Industrieweg 5, 9301 LM Roden, The Netherlands. ■ STIKO® is a manufacturer of mechanical instruments in the area of temperature, pressure and calibration. We offer thermometers, pressure gauges, pressure and/or temperature recorders, as well as calibration equipment. We develop and manufacture all our instruments to ISO-9001-2008 standards. ■ In order to construct your instrument please proceed as follows: EXAMPLE 1 1 Instrument type 2 Pressure range 3 Electrical device 4 Any options PBX100LA 0 + 250 bar I-1-Hz contact Blow-out plug EXAMPLE 2 1 Instrument type 2 Pressure range 3 Capillary tube 4 Electrical device 5 Any options ■ Abbreviations used in this document: O.D. = ON DEMAND; N.A. = NOT AVAILABLE ■ Dimensions used in this document are in: millimeters (mm). ■ Your order will be confirmed by e-mail. ■ Other variations which are not mentioned in this document are on demand (if possible). CERTIFICATION ■ Certificates of Conformity to the company's published specifications are available on request for all STIKO® manufactured products according to EN 10204 2.2. ■ Certificates of Calibration for all STIKO® manufactured products are also available. These certificates indicate deviations from standards traceable to R V A - D K D (Dutch - German National Standards). The results are recorded in a certificate which include calibration date, instrument serial number, type number and the R V A or D K D standard used. ■ Material Certificates according to EN 10204 3.1 for all STIKO® manufactured products are also available. These certificates indicate specifications of the materials used. WARRANTY AND REPAIR SERVICE ■ An efficient repair and sparepart service is available at competitive rates for STIKO® products and products of other manufacturers. Instruments for repair should be sent carriage paid and labelled with the sender's name and address, together with a brief description of the work required. Within two days after receiving the instruments, you will get a full detailed offer for the repair job. ■ A warranty period of 24 months is applicable for all instruments sold as of january 1st, 20

TANK LEVEL PRESSURE GAUGES, TYPE PFS-TL TYPE PFS-TL STANDARD MODEL CASE WETTED PARTS back flange, capillary bottom entry welded diaphragm DIAL : aluminium, black figures on white according to tank table, see sample : aluminium black AMBIENT TEMP. CAPILLARY MOVEMENT : red copper with yellow PVC cover : nickel plated brass IM PFS-TL160XB-IM Tank wall mounting EXTRA COSTS