■ This specification document is for pressure gauges manufactured by: STIKO, Industrieweg 5, 9301 LM Roden, The Netherlands. ■ STIKO® is a manufacturer of mechanical instruments in the area of temperature, pressure and calibration. We offer thermometers, pressure gauges, pressure and/or temperature recorders, as well as calibration equipment. We develop and manufacture all our instruments to ISO-9001-2008 standards. ■ In order to construct your instrument please proceed as follows: EXAMPLE 1 1 Instrument type 2 Pressure range 3 Electrical device 4 Any options PBX100LA 0 + 250 bar I-1-Hz contact Blow-out plug EXAMPLE 2 1 Instrument type 2 Pressure range 3 Capillary tube 4 Electrical device 5 Any options ■ Abbreviations used in this document: O.D. = ON DEMAND; N.A. = NOT AVAILABLE ■ Dimensions used in this document are in: millimeters (mm). ■ Your order will be confirmed by e-mail. ■ Other variations which are not mentioned in this document are on demand (if possible). CERTIFICATION ■ Certificates of Conformity to the company's published specifications are available on request for all STIKO® manufactured products according to EN 10204 2.2. ■ Certificates of Calibration for all STIKO® manufactured products are also available. These certificates indicate deviations from standards traceable to R V A - D K D (Dutch - German National Standards). The results are recorded in a certificate which include calibration date, instrument serial number, type number and the R V A or D K D standard used. ■ Material Certificates according to EN 10204 3.1 for all STIKO® manufactured products are also available. These certificates indicate specifications of the materials used. WARRANTY AND REPAIR SERVICE ■ An efficient repair and sparepart service is available at competitive rates for STIKO® products and products of other manufacturers. Instruments for repair should be sent carriage paid and labelled with the sender's name and address, together with a brief description of the work required. Within two days after receiving the instruments, you will get a full detailed offer for the repair job. ■ A warranty period of 24 months is applicable for all instruments sold as of january 1st, 20

Selection guide Type SUB SEA pressure gauge type Icase diameter operating principle gauge reading = Pprocess - Pseawater columr bayonet lock For use inside decompression chambers. Vent connection for ambient pressure. = Pdecompression tank For use inside decompression chambers. Vent connection for ambient pressure. = Pdecompression tank solid drilled, bar stock solid drilled, bar stock bayonet lock solid drilled, bar stock case material wetted parts fully welded system fully welded system fully welded system Tube: copper/berylium fully welded system catalogue page range (span) * liquid filled...

"SUB SEA" PRESSURE GAUGES, TYPE PBX-SS-CD CASE : 0 100 mm - bayonet lock, AISI316/1.4401, 100 % GLYCERINE FILLED WETTED PARTS : bourdon tube + connection AISI316Ti/1.4571 WINDOW : armoured glass 4 mm DIAL : aluminium, black figures on white POINTER : aluminium, black for higher ranges see page 55 (max. 1600 bar) ACCURACY : ± 1.0% F.S. / class 1 MOVEMENT : AISI304/1.4301 APPLICATION : for operating at great depths of sea water OPTIONS : see page 57-58 MODEL CD "compensation diaphragm" UNIT PRICE

TYPE PBX-SS, with pressure tight solid barstock case STANDARD MODEL CASE : screwed bezel, AISI316/1.4401, pressure tight for depths down to; see below WETTED PARTS : bourdon tube + connection AISI316Ti/1.4571 WINDOW : armoured glass 19mm thick (063 15mm) DIAL : aluminium, black figures on white POINTER : aluminium, black CONNECTION : 063mm: YVBSP or Y"NPT RANGE ACCURACY MOVEMENT APPLICATION OPTIONS : 0-6 upto 0-60 bar, acc. to EN 837-1 (see page 55) for higher ranges (max. 1600 bar) : case 0 63 : ± 1.6% F.S./ class 1.6 case 0100 and 0160 : ± 1.0% F.S ./ class 1 : AISI304/1.4301 : for operating...

"SUB SEA" PRESSURE GAUGES, TYPE PBX-SS-ED STANDARD MODEL CASE : 0 100 mm - screwed bezel, AISI316/1.4401, pressure tight for depths down to 4000 metres WETTED PARTS : bourdon tube + connection AISI316Ti/1.4571 WINDOW : armoured glass 35 mm DIAL : aluminium, black figures on white POINTER : aluminium, black for higher ranges see page 55 (max. 1600 bar) ACCURACY : ± 1.0% F.S. / class 1 APPLICATION : for operating at great depths of sea water and in hyperbaric conditions OPTIONS : see page 55-56 MODEL ED "EXTRA DEEP" DIMENSIONS UNIT PRICE p LX GLYCERINE FILLED CASE SILICONE OIL FILLED CASE

'SUB SEA" PRESSURE GAUGES, TYPE PBX-SS-UD 6000 metres STANDARD MODEL CASE : 0 140 mm - screwed bezel, AISI316/1.4401, pressure tight for depths down to 6000 metres WETTED PARTS : bourdon tube + connection AISI316Ti/1.4571 WINDOW : armoured glass 40 mm DIAL : aluminium, black figures on white POINTER : aluminium, black for higher ranges see page 55 (max. 1600 bar) ACCURACY : ± 1.0% F.S. / class 1 APPLICATION : for operating at great depths of sea water OPTIONS : see page 55-56 MODEL UD "ULTRA DEEP" DIMENSIONS UNIT PRICE LX GLYCERINE FILLED CASE SILICONE OIL FILLED CASE

CAISSON TEST PRESSURE GAUGES, TYPE PBX-CAISSON stainless steel with bourdon tube of copper-beryllium STANDARD MODEL CASE : Ø160 mm bayonet lock, AISI304/1.4301, IP-45, blow-out BOURDON TUBE : mirrorscale aluminium, black figures on white : knife edge aluminium, black CONNECTION to outside chamber : brass with stownbearing CALIBRATION REPORT APPLICATION : included, minimal 10 points : for use inside decompression chambers OPTIONS / GRADUATIONS with vent connection for ambient pressure decompression chamber Ambient pressure OPTIONS DOUBLE SCALE EXTRA COSTS for use inside decompression chambers...

"SUB SEA" PRESSURE GAUGES, TYPE PBX-SS-CAISSON CASE WETTED PARTS WINDOW DIAL POINTER CONNECTION RANGE ACCURACY MOVEMENT APPLICATION _STANDARD MODEL : 0 160 mm - screwed bezel, AISI316/1.4401, pressure tight for decompression tanks : bourdon tube + connection AISI316Ti/1.4571 : armoured glass 19 mm : aluminium, black figures on white : aluminium, black : 1/2 " BSP or 1/2 " NPT : 0-10 upto 0-600 Meter sea water, acc. to EN 837-1 for higher ranges see page 55 (max. 1600 bar) : ± 1.0% F.S ./ class 1 : AISI304/1.4301 : for use inside decompression chambers with vent connection for ambient pressure...