Zubehör
16Pages

Clever Accessories with Cubic Head Precision and Repeatability in 3D Metrology 1

Easy application, clever design Stiefelmayer accessories – built to last Standard metrology accessories need to be changed frequently due to wear. In contrast, Stiefelmayer long-lived high-quality solutions are built to last. The clever Cubic Head solution in combination with the fixation insert enables various extensions and measuring tools to be attached in different directions. Regardless of the orientation – downwards or upwards, leftwards, rightwards or to the front – the accuracy remains constantly below 10 µ. The Stiefelmayer Cubic Head never shows more play than this, even after...

Added value by digital options – from static to multifunctional operation All accessories and tools are now also available online in our eShop. You may get an overview regarding our product lines or send a direct request to our experts team with one click. Just try it by yourself – you can access our eShop by using the QR code at the bottom of the page. Our innovative EASY Line wireless iPad visualization supports our accessories program with its easy-to-use project management: Any attachment of tools or extensions can be documented with descriptions and pictures, enabling all users to...

Positioning across corners and edges The fixed tracing tools are the perfect fit for length measurement between two surfaces. The surfaces are probed with high precision using the Stiefelmayer measurement tools. As the tool only uses a 90° tail end it is always perfectly positioned to the middle of the Cubic Head. Various options like fixed or rotating tracing points are available. The latter can be used to work flexibly from any direction without having to change the tool installation. With the tapered probes thin or narrow areas can be detected. For every application and each workpiece...

Tracing inserts and tracing points Fixed tracing insert Art. No. 450210 / L 100 mm Fixed tracing insert Art. No. 450211 / L 200 mm Fixed tracing point 80 Art. No. 450096 / L 100 mm Fixed tracing point Art. No. 450097 / L 200 mm Rotating tracing insert Art. No. 450209 / L 100 mm Also available Rotating tracing point Art. No. 450102 / L 125 mm

Positioning in holes and cavities The tapered probe enables exact positioning in holes or cavities. For example the centre of a bore can be precisely identified relatively to a reference position. The distance between two bore centers may be measured as well with this clever measuring tool which is available in different designs. By using various diameters of the cone, positioning in smaller or larger holes is possible. STIEFELMAYER Messtechnik I Accessories with Cubic Head

Tapered probes for diameter 2 to 60 millimeters Tapered probe Art. No. 450115 / Ø 40 – 60 mm Dim. in mm Ø D0 – Ø D1 Abmessungen L0 L1

Many options for layout tasks In order to further process larger components, for example in the area of iron casting, in tool engineering or in design studios for clay modelling, marking tools are an optimum fit in combination with manual or CNC/manual machines. The exchangeable scriber along with the fitting scriber holder may be used to do a point mark or a stroke mark. With the circular marking device round marks are possible. For marking large, rough and inhomogeneous surfaces of harder materials like cast iron, the spring-loaded scriber or the pneumatic drilling head are ideally...

Marking-out and drilling tools ersetzt durch: Scriber holder for scriber made of tool steel with carbide tipped point Replacement scriber for spring-loaded scriber STIEFELMAYER Reißnadelhalter Art. No. 450213 Art. No. 450221 STIEFELMAYER Federnde Reißnadel The scriber holder can be used for all sorts of A4 450213-K 0 1:2 3D marking-out. The marking is carried out by tuning in Arbeit 1 1 A4 450214-K in Arbeit 1 Scriber made of tool steel with carbide tipped point Datum Zul. Abweichung nicht tolerierter Bearbeitungsmasse nach DIN ISO 2768-m 0,5 - GEWINDE WEICH ! Gesamtabmessung Fertigteil...

Flexibility with efficient supporting tools With the extension modules deep fixture or pipes may be measured or scanned inside. The extensions are available in different lengths and can be combined in flexible ways. The extensions in light-weight design contain a highly precise Cubic Head made of hard-anodising coated aluminium. The location head with angle graduation allows to work with angles smaller than 90°. By using the clamping insert, the operator can connect various extensions to each other and also attach the final measuring tool to the Cubic Head, thus ensuring highly flexible and...

Extensions and auxiliary means Location head with extension – Light-weight 100 Art. No. 450431 / L 100 mm Art. No. 450434 / L 400 mm 90 Art. No. 450432 / L 200 mm Art. No. 3488014 / L 500 mm 80 Art. No. 450433 / L 300 mm Art. No. 3488021 / L 1 000 mm 70 60 50 40 30 20 ersetzt durch: Zul. Abweichung nicht tolerierter Bearbeitungsmasse nach DIN ISO 2768-m 0,5 - Gesamtabmessung Fertigteil GEWINDE WEICH ! STIEFELMAYER Aufnahmekopf mit Winkelteilung Bezeichnung: 630 ±0,2 NuernbergerMT 18.04.2023 Ersteller messtechnik@stiefelmayer.de I www.stiefelmayer.de 30 - 120 ±0,3 Oberflächen nach...

Tactile measuring By means of a special Stiefelmayer adapter, various manual and automized Renishaw probe heads may be attached to the Stiefelmayer Cubic Head. This provides the possibility to combine the complete range of Renishaw tactile probes with the Stiefelmayer system. The connecting module also enables the attachment of a corresponding laser scanner, e. g. from Nikon. Reference standards for tactile probes as well as for laser scanners are also part of our range of products. STIEFELMAYER Messtechnik I Accessories with Cubic Head

Renishaw probe heads for tactile measuring and scanning Renishaw Probe head MIH Art. No. on request Renishaw Probe head PH10 Art. No. on request In addition to the probe heads shown above, Renishaw‘s complete range of measuring probes is available from us: Measuring probes TP6, TP20, probe extensions PEL 1-4, threaded styli with various lengths and ball diameters 1 Oberflächenbeh.: Oberflächenbeh.: ersetzt durch: ersetzt durch: Reference cube HAM STIEFELMAYER STIEFELMAYER Referenzkugel D-50 mm D-50 mm Art. No. 450104 / L 370 mm / 50 x 50 x 50 mm Referenzkugel Ind Datum Änderung Datum Name...