OSTI Safety Network & Application Controllers Catalog
6Pages

Selection Guide I-2 Safety Network Controller NE1A- SCPU01-V1/-SCPU02 J-2 Safety I/O Terminals DST1- ID12SL-1/MD16SL-1/MRD08SL-1/-XD08089SL-1 J-3 Safety Network Configurator WS02-CFSC1-E J-4 Most Popular Models J-5 J-1 >

TUVRheinland Communications Power Supply: 11 to 25 VDC supplied via communications connector Unit Power Supply Voltage (VO): 20.4 to 26.4 VDC (24 VDC բȒ15%/+10%) I/O Power Supply Voltage (V1, V2): 20.4 to 26.4 VDC (24 VDC −15%/+10%) Current ConsumptionCommunications Power Supply: 24 VDC, 15 mA Internal Circuit Power Supply: NE1A-SCPU01-V1: 24 VDC, 230 mA NE1A-SCPU02: 24 VDC, 280 mA Overvoltage Category: II Noise Immunity: Conforms to IEC61131-2. > Vibration Resistance: 10 to 57 Hz: 0.35 mm, 57 to 150 Hz: 50m/s > 2 Shock Resistance: 150 m/s > 2 : 11 ms Mounting Method: 35-mm DIN Track (IEC...

Applicable Computer: IBM PC/AT or compatible CPU: Intel Pentium PC, 300 MHz or higher (Pentium III, 1-GHz or higher recommended) OS: Microsoft Windows 2000 Microsoft Windows XP Supported Languages: English RAM: 256 MB or higher Hard Disk: At least 200 MB of available hard disk space Monitor: S-VGA or better display capability > CD-ROM: One CD-ROM drive min. Communications Ports: One of the following communications ports is required. USB port Connecting online via the USB port (USB 1.1) of the NE1A-SCPU-series controllers Օ DeviceNet Interface Card 3G8F7-DRM21-V1: Connecting online via...

Model Part No. Description NE1A-SCPU01 NE1A-SCPU01-V1 11061-0009 CPU unit with I/O, 16 inputs, 4 test outputs, 8 outputs, program size - 254 blocks NE1A-SCPU02 11061-0010 CPU unit with I/O, 40 inputs, 8 test outputs, 8 outputs, program size - 254 blocks DST1 DST1-ID12SL-1 11062-0001 Slave I/O unit, 12 inputs, 4 test outputs DST1-MD16SL-1 11062-0002 Slave I/O unit, 8 inputs, 8 outputs, 4 test outputs DST1-XD0808SL-1 11062-0014 Programmable slave I/O, 8 inputs, 8 outputs, 4 test outputs DST1-MRD08SL-1 11062-0003 Slave I/O unit, 4 inputs, 4 relay outputs, 4 test outputs WS02-CFSC1-E...

Hot Plastic Molding Machine This plastic molding process presents both heat and pinch-point hazards. In order to keep personnel away from hot equipment used to melt plastic pellets, hinged hard guards are held in place by solenoid-locking safety switches which hold the guards closed until the machine control system determines that the temperature has cooled to a safe point. Additionally, personnel are protected from a point of operation hazard using an Omron STI safety light curtain. > Air Bag Assembly Station In this application, an MCJ4700 light curtain is the ideal guarding solution. Its...