SD series MEDICAL & LABORATORY AUTOCLAVES TECHNICAL DATA SHEET
5Pages

SD series MEDICAL & LABORATORY AUTOCLAVES TECHNICAL DATA SHEET The SD series of high temperature steam sterilizers (autoclaves) have horizontal chambers with vertical sliding doors. The chambers are fully jacketed over all four sides and back. They are available in various sizes and configurations of materials, doors, vacuum systems, steam generation, sterilizing cycles, recording systems, and loading equipment.

DIMENSIONS There are three basic cross-sections of chamber: 1. 500mm diameter 2. 460mm x 460mm square 3. 660mm x 660mm square The chambers can be manufactured to any specified depth - common sizes are shown below. The chambers marked STANDARD are continuously manufactured for stock in single door configurations. All other chamber sizes are made to order. chamber dimensions (mm) 500 (diameter) x 750 (deep) 500 (diameter) x 1000 (deep) 460 (w) x 460 (h) x 760 (d) 460 (w) x 460 (h) x 950 (d) 460 (w) x 460 (h) x 1200 (d) 460 (w) x 460 (h) x 1450 (d) 660 (w) x 660 (h) x 915 (d) 660 (w) x 660 (h)...

PANELLING The door cover and front panelling are made of satin finish, grade 304 stainless steel fitted to an anodised aluminium trim. Where machines are free-standing and not recessed into a partition wall, stainless steel side covers are fitted which can be easily removed for maintenance purposes. PIPES AND VALVES Pipes are welded or soldered wherever possible to minimise the risk of leakage. Valves and other components are installed using high quality compression fittings for ease of removal for maintenance. Valves 220V electric solenoid STANDARD pilot operated pneumatic Piping high...

CONTROL SYSTEMS Every autoclave is fitted with Steridium’s microprocessor based embedded control system. This is a modular system which uses discrete modules for digital inputs, digital outputs, and analogue inputs. Each unit can hold up to 20 sterilizing cycles, while the simplicity of the system enables users to easily modify cycles or built completely new cyces. Main control unit Microprocessor AMD 80188 / 80186 series Communications ports RS232, RS 485 Memory 512k SRAM Analogue inputs Channels Input type Temperature resolution Pressure resolution Sampling rate Digital inputs Channels...

MEDICAL CYCLES Low temperature steam & formaldehyde (LTSF) Other temperatures between 50 C and 80 C can be supplied on request. Test cycles LTSF cleaning cycle LTSF vacuum leak test WASTE CYCLES (Medical & Laboratory) Solid waste @ 134 C Liquid waste @ 121 C LABORATORY CYCLES Packs (porous loads) @ 134 C Packs (porous loads) @ 121 C Fluids @ 121 C Metalware @ 134 C Plasticware @ 121 C Culture media @ 121 C Culture media @ 115 C Culture media @ 105 C Prions @ 134 C Prions @ 121 C Decontamination (pasteurising) @ 70C Test cycles Bowie & Dick Test @ 134 C Vacuum Leak Test STEAM GENERATORS The...