lighest Standards Steridium laboratory incubators are used throughout the world by facilities which demand the highest manufactured from the highest quality stainless steel, and the exteriors are epoxy powder coated, to give an exceptional lifespan with minimal maintenance. Solid doors are available with an optional inner glass viewing door in order to maintain temperature while being able to inspect the product. Alternatively, full double-glazed viewing doors can be fitted which provide permanent viewing of the interior chamber. Wide Temperature Range from -20°C to 80°C All incubators are fitted with a magnetic seal which permits operation up to 80°C. Refrigerated incubators are available with two levels of cooling, standard cooling to 4°C, or freezing to -20°C. Steridium engineers have refined the use of pulsed hot-gas bypass technology in the refrigeration control systems to provide exceptional accuracy across the wide temperature spectrum. Configurations are available to enhance the capabilities of the standard incubators. Internal power sockets enable internal operation of electrical equipment and devices, while Steridium's orbital shaker can be fitted

Micro-Digital Control Steridium engineers have microdigital control systems to give exceptional control stability over time. An auto-tuning facility that the optimum settings are used on every incubator The controller includes an alarm system which can be configured deviation alarm. In the unlikely event of a control system failure, thermostat will activate the element to protect the product Remote Control, Data-Logging, and Programmability The standard incubator can be connected to a remote PC via an RS 485 interface, while Steridium's basic data-logging software enables temperatures to be recorded...