Part of Stephenson Gobin Ltd. A British Engines Group Company SG Transmission Ltd. Bishop Auckland, County Durham UK DL14 0HY Armature position 3 Pole plug + socket (4 position) on Mag 50 - 100 K Flying leads optional on Mag 50 - 100 Note a.c and d.c. plug + socket dimensional variations Leads Plug + Socket General Information TECHNICAL SPECIFICATION Voltage Duty Cycle Ambient Temp. Standard Finish Bright Zinc 1) Force is measured with an armature in EN1A (BS230 M07) material with a finish of 0.38µm max. and minimum thickness ‘T’. 2) All magnets can be supplied with mounting flanges to suit any particular mounting requirements. 3) Pole faces can be supplied electro-plated, however this will result in approx 10% reduction in Axial force. 4) All magnets can be supplied with flying leads, and the size 50 and above can be fitted with a 3-pole plug and free socket. • 24 Vd.c. or 230 Va.c. Operating Voltages. • Axial Forces ranging from 90 to 3500N • Special Voltages / Forces / Mountings available on request VOLTAGE ROTOR • High Quality, Cost effective package FIELD MOUNTING DESIGN NO. FIRE SECURITY

Part of Stephenson Gobin Ltd. A British Engines Group Company SG Transmission Ltd. Bishop Auckland, County Durham UK DL14 0HY Stephenson Gobin Ltd. manufactures a wide range of general purpose holding magnets for demanding industrial applications. Holding electromagnets are magnetic devices with steel bodies and internal coils used to securely hold ferromagnetic parts once the coil is energised. The magnets are energised to hold, where electric current is required to turn the magnet ON. Power is then removed to turn the magnet OFF. The holding forces of the securing magnets are largely dependent...