BBAS STANDARD
1Pages

{{requestButtons}}

Catalog excerpts

BBAS STANDARD - 1

CATEGORY Pneumatic machine APPLICATIONS Quarry Water well Ground reinforcement MAINCHARACTERISTICS Torque: 60 or 80 kgm Traction: 1300 kg DRILLING METHODS Dth hammer Odex casing system Drag bit Rock bit Auger DRILLING CAPACITIES Depth; 30 meters (*) Diameter: 150 mm (*) MAST Foreseen for pipe of 2 meters long Total length: 3.63 meters Steel profile ROTATION F574 (version 60P) Pneumatic motor F574FB Torque: 60 kgm Rotation speed: 0 to 75 rpm Air consumption: 1500 l/min at 6 bars TRACTION F57 5 Pneumatic motor F575DB Traction force: 1300 kg Air consumption: 1500 l/min at 6 bars CHAIN FEED By single chain with pitch of 25.4 Rupture charge: 6 tons INFERIOR GUIDE With guide for rod according to drilling diameter CONTROL PANEL Installed on the mast, it groups: - Control of the rotation - Control of the traction - Control of thrust regulator - Control of the air valve for the DTH hammer - Manometers of control - Emergency stop LUBRICATION Supplied with lubricator for drilling with Dth hammer Tank capacity: 8 liters CHASSIS Wide chassis on 2 wheels Width: 1600 mm Slope of the mast front - rear Adjustable position in rough terrains with independent wheels and allowing the lateral slope of the mast. WEIGHT 550 kg COLOR Orange OPTION ROTATION F694 (version 80P) Pneumatic motor F694B Torque: 80 kgm Rotation speed: 0 to 45 rpm Air consumption: 1500 l/min at 6 bars PNEUMATIC INJECTION GROUP Pneumatic injection unit on skid Tank capacity: 172 liters Maximum rotation speed: 250 rpm Maximum injection pressure: 60 bars Cement flow: 20 liters / min Weight: 340 kg STENUICK International 34, rue des Chatelfiers BP 2803 (*indicative data without commitment IMPORTANT: The technical characteristics can be modified without advance notice Site : www.stenuick.fr

Open the catalog to page 1

All Stenuick International catalogs and technical brochures

  1. TRILAME

    1 Pages

  2. Drill pipes

    1 Pages