34, rue des Châtelliers BP 2803 45028 Orléans Cedex 1 Téléphone : 02 38 86 50 46 Télécopie : 02 38 86 78 91 Email : [email protected] Site : www.stenuick.fr STENUICK International BBAS STANDARD MAST Foreseen for pipe of 2 meters long Useful length: 2.50 meters Total length: 3.63 meters Steel profile ROTATION Version 60P Pneumatic motor F574FB Torque: 60 kgm Rotation speed: 0 to 75 rpm Air consumption: 1500 l/min at 6 bars Version 80P Pneumatic motor F694B Torque: 80 kgm Rotation speed: 0 to 45 rpm Air consumption: 1500 l/min at 6 bars TRACTION Pneumatic motor F575DB Traction force: 1300 kg Air consumption: 1500 l/min at 6 bars CHAIN FEED By single chain with pitch of 25.4 Rupture charge: 6 tons INFERIOR GUIDE With guide for rod according to drilling diameter CONTROL PANEL Installed on the mast, it groups: - Command of the rotation - Command of the traction - Command of thrust regulator - Command of the air valve for the DTH hammer - Manometers of control - Emergency stop LUBRICATION Supplied with lubricator for drilling with Dth hammer Tank capacity: 8 liters CHASSIS Wide chassis on 2 wheels Width: 1600 mm Slope of the mast front - rear Adjustable position in rough terrains with independent wheels and allowing the lateral slope of the mast. WEIGHT 550 kg COLOR Orange IMPORTANT: The technical characteristics can be modified without advance notice OPTION Not available CATEGORY Pneumatic machine APPLICATIONS Quarry Water well Ground reinforcement MAIN CHARACTERISTICS Torque: 60 or 80 kgm Traction: 1300 kg DRILLING METHODS Dth hammer Odex casing system Drag bit Auger DRILLING CAPACITIES Depth: 30 meters (*) Diameter: 150 mm (*) (* )Indicative data without commitment