BBAS STANDARD Renforcée

Product catalog summary

Specifications:
The STENUICK BBAS STANDARD Reinforced MAST is designed for pipes of 2 meters long with a useful length of 2.50 meters and a total length of 3.63 meters. It features a steel profile and comes in two versions for rotation: Version 80P with a pneumatic motor F694B offering a torque of 80 kgm and Version 270P with a pneumatic motor F622CA offering a torque of 270 kgm. Both versions have a rotation speed of 0 to 45 rpm and require air consumption of 1500 l/min and 2500 l/min at 6 bars respectively.

Traction:
The machine is equipped with pneumatic motors F575DB + F595B with brake, providing a traction force of 2600 kg and air consumption of 3000 l/min at 6 bars.

Chain Feed:
It uses a single chain with a pitch of 31.75 and a rupture charge of 10 tons. The chain is protected by the central tube of the mast.

Control Panel:
Located on the mast, it includes commands for rotation, traction, thrust regulator, air valve for the DTH hammer, control manometers, and an emergency stop.

Lubrication:
Comes with a lubricator for drilling with a DTH hammer, with a tank capacity of 8 liters.

Chassis:
The wide chassis on 2 wheels has a width of 1600 mm and allows adjustable positioning in rough terrains.

Weight and Color:
The machine weighs 900 kg and is colored orange.

Options:
A pneumatic key for unscrewing drill pipes is available as an option.

Applications:
Suitable for quarry, water well, and ground reinforcement applications.

Main Characteristics:
Torque options of 80 or 270 kgm and a traction force of 2600 kg.

Drilling Methods:
Compatible with DTH hammer, Odex casing system, drag bit, and auger.

Drilling Capacities:
Capable of drilling up to a depth of 60 meters and a diameter of 203 mm. Note that these are indicative data without commitment.

Catalog excerpts

34, rue des Châtelliers BP 2803 45028 Orléans Cedex 1 Téléphone : 02 38 86 50 46 Télécopie : 02 38 86 78 91 Email : [email protected] Site : www.stenuick.fr STENUICK International BBAS STANDARD Renforcée MAST Foreseen for pipe of 2 meters long Useful length: 2.50 meters Total length: 3.63 meters Steel profile ROTATION Version 80P Pneumatic motor F694B Torque: 80 kgm Rotation speed: 0 to 45 rpm Air consumption: 1500 l/min at 6 bars Version 270P Pneumatic motor F622CA Torque: 270 kgm Rotation speed: 0 to 45 rpm Air consumption: 2500 l/min at 6 bars TRACTION Pneumatics motors F575DB + F595B with brake Traction force: 2600 kg Air consumption: 3000 l/min at 6 bars CHAIN FEED By single chain with pitch of 31.75 Rupture charge: 10 tons The chain is protected by the central tube of the mast, the countershaft are assured by rollers mounted on ball bearings. INFERIOR GUIDE With guide for rod according to drilling diameter CONTROL PANEL Installed on the mast, it groups: - Command of the rotation - Command of the traction - Command of thrust regulator - Command of the air valve for the DTH hammer - Manometers of control - Emergency stop LUBRICATION Supplied with lubricator for drilling with Dth hammer Tank capacity: 8 liters CHASSIS Wide chassis on 2 wheels Width: 1600 mm Slope of the mast front - rear Adjustable position in rough terrains with independent wheels and allowing the lateral slope of the mast. WEIGHT 900 kg COLOR Orange IMPORTANT: The technical characteristics can be modified without advance notice OPTION PNEUMATIC KEY Equipped with a pneumatic key for the unscrewing of the drill pipes CATEGORY Pneumatic machine APPLICATIONS Quarry Water well Ground reinforcement MAIN CHARACTERISTICS Torque: 80 or 270 kgm Traction: 2600 kg DRILLING METHODS Dth hammer Odex casing system Drag bit Auger DRILLING CAPACITIES Depth: 60 meters (*) Diameter: 203 mm (*) (* )Indicative data without commitment

Open the catalog to page 1

BBAS STANDARD Renforcée

BBAS STANDARD Renforcée

Catalog excerpts

All Stenuick International catalogs and technical brochures