RUBBER EXPANSION JOINT TYPE AG-5 Please comply with the general technical instructions regarding reaction force, moving force, fixed point load, installation instructions etc. Subject to technical alterations and deviations resulting from the manufacturing process. UNIVERSAL-EXPANSION JOINT DN 20 – DN 50 STRUCTURE TYPE AG-5 / RUBBER BELLOWS PN 16 Universal expansion joint consisting of a rubber bellows with threaded ends Male or female thread Combination of female/male thread Highly elastic molded bellows in various rubber grades Synthetic fibre reinforcement Electrical impedance 103 to 106 Ohm (DIN IEC 93, VDE 0303-30) Rubber grade* Colour code Hot water, acids, lyes hydrocarbon containing liquids Drinking water Possible uses *Check or inquire about the resistance of the rubber grade to temperature and medium. Technical design Max. perm. operating pressure Bursting pressure Max. operating pressure to be set 30 % lower for shock loads. *Please consider a decrease of pressure due to temperature (see technical annex). Type AG-5 with female thread union nut with flat gasket APPLICATIONS for reducing thermal and mechanical tension for muffling vibration and noise for compensating axial, lateral and angular movement to compensate for installation inaccuracies domestic industry for heating plants and hot water pipes in oil hydraulic systems CERTIFICATES CE (PED 2014/68/EU) Drinking water THREADED ENDS/ VERSIONS Male thread acc. ISO 7-1 (DIN 2999). Union nut with female thread acc. ISO 228-1; flat sealing, suitable for drinking water Materials Standard: 1.4571 Type AG-5 with male thread DIMENSIONS STANDARD PROGRAM DN ∆ ax Axial movement Compression Elongation - mm + mm 30 30 35 35 35 ∆ ang Weight Angular movement approx. ± \ degrees kg 25 25 25 25 22 Please inquire for simult