Stemmann-Technik SICL 10 - Insulated-Conductor-Line-System
24Pages

STEMMANN- TECHNIK Si Fandstan Electric Group Individually Insulated Conductor Line System STEMMANN PRODUCTS

Alle Rechte vorbehalten. Satz- & Druckfehler sowie Änderungen vorbehalten. All Rights reserved. Subject to changes, printing and typesetting errors.

SICL10 - Individually Insulated Conductor Line System SICL10 conductor line system Technical data SICL10 system components Suspension, standard / EMS profile Rigid connector Electrical supply Track separation Conductor line expansion Single current collector Single current collector console Dual current collector Dual current collector console Curve profile Connection box for EMS systems, sliding contact control Connection cable, cleaning unit, tools SICL conductor line systems SICL, type overview Notes STEMMANN-TECHNIK QUALITY MADE IN GERMANY

SICL10 - Individually Insulated Conductor Line System The SICL10 System Our product line in the range of the individually insulated conductor lines consists of the types SICL10, SICL20, SICL25 and SICL40. The SICL10-system is a conductor line system for indoors applications protected against accidental contact and plastic-insulated, designed acc. to VDE 0100. The system has the option of horizontal or vertical arrangement of all bars and curves in all directions. APPLICATIONS EMS-technology Warehouse systems Amusement rides Crane systems SYSTEM COMPONENTS 1 2 Rigid connector Track...

SICL10 QUALITY MADE IN GERMANY Note on the use of stainless steel conductor lines: Stainless steel conductor material is used as control line and data transmission in corrosive environment. TECHNICAL DATA OF THE SICL10 CONDUCTOR BAR Housing material / -colours PVC / blue (phase), green (earth) Standard length Phase- / suspension distance Amperage (100% duty cycle at 35°C) 100 A (copper) / 10 A (stainless steel) Conductor bar cross section Conductor material C = copper / N = stainless steel Ambient temperature Travel speed Electrical data special contact resistance (IEC 60093) Smallest curve...

SICL10 - Individually Insulated Conductor Line System SICL10 conductor bar To prevent inadvertent contact with the live parts, our SICL10 conductor bars are equipped with an outer plastic casing. The coloured plastic casing differentiates the phase bars (blue) from the earth bars (green). All conductor bars are pre-assembled with a cut-out at the ends of the copper conductor profiles and allow easy installation of all components. Cut-outs are necessary to connect the SICL10 conductor bars. We offer a special press tool to make cut-outs into the shortened conductor bar at site. SICL10...

Standard suspension SICL10 system suspensions are factory-fitted in screwed version and available with 10 clamps in maximum. Single suspensions can be placed one next to the other. Special suspensions are available on customer request. SICL10 SUSPENSION, STANDARD Article-No. Note: Screwed versions have to be ordered separately. SICL10 SUSPENSION, SCREWED VERSION Type hexagon socket screw hexagon head screw tapped bore-hole through bore-hole * = usable thread length = screw thread length less 1.7 mm Suspensions for EMS profiles Suspensions for EMS systems are produced in order to the profile...

SICL10 - Individually Insulated Conductor Line System Conductor bar rigid connector Rigid connectors are available as screwed and clamped versions and designed for currents up to 100 A. Clamped version for fast assembly Screwed version for quick disconnection of the conductor bars SICL10 CONDUCTOR BAR RIGID CONNECTOR Type screwed version Current load capacity clamped version cylinder screw M6 galvanized

Electrical supply We offer electrical supplies as switch-transition integrated into end- and transition caps (see Note: Only use dual insulated connection cables for supply connection (not included in the scope of supply). Type clamped version Article-No. (for phase and grounding) 5202039 Article-No. (reverse polarity protected, PE+) 5202469 Current load capacity max. 80 A (100% ED) Design of the screw M5, galvanized screwed version

SICL10 - Individually Insulated Conductor Line System Track separation Track seperations are used in the main and control streams to interrupt installation sections for maintenance, supply lines or for control purposes. Our SICL10 system includes separations with and without additional electrical supply. Clamped version for fast assembly Screwed version incl. electrical supply for quick replacement of the conductor bars Note: Only use dual insulated connection cables for supply connection. SICL10 TRACK SEPARATION Type screwed version Article-No. (for phase and grounding) Article-No....

Conductor line expansion In order to counteract the temperature-dependent expansion of the conductor bars, depending on the system length and temperature conditions, expansions have to be integrated into the system. The factory-adjusted expansions are equipped with two electrical supplies and one expansion joint. The maximum possible expansion range is < 20 mm. Larger expansion ranges must be balanced out by several conductor line expansions. STRAIN DIAGRAM Example: blue (phase) green (earth) green (reverse polarity protected, PE+)

SICL10 - Individually Insulated Conductor Line System Fix point In order to prevent an unintentional movement of the conductor line system, the bars in the center of the system or in the expansion track area have to be secured with fix points. The fix points in combination with the suspension ensure the secure hold. Screwed version Installation requires two screwed version clamps per fix point. Installation requires a borehole, Ø 3 mm into the conductor bar for fixing the splint pin. screwed version

SICL10 conductor bar endings are protected from contact by end- or transition caps. In connection with the transition base plate the end caps are used as switch-transition. Optionally the end- and transition caps are available with a feeding of a maximum of 30 A. EMS systems: Optimized for the relevant EMS profile, we provide a drilling template as fit-up aid. SICL10 END- and TRANSITION CAP Type clamped version screwed version Article-No. (for phase and grounding) Article-No. (polarity reversal protected, PE+) Current load without feeding Connection screw Connection cable Switch-transition...