Enrobing Belts

Product catalog summary

Introduction
This document provides technical specifications and requirements for Enrobing Belts, specifically the Braided Rod Belts of Group 700, manufactured by STEINHAUS GmbH. These belts are primarily used in the confectionery industry for coating or enrobing chocolate, sugar confectionery, and biscuits.

Specifications

Material: Options include galvanized or tinned mild steel, spring steel, and various stainless steel grades.
Dimensions: Belt width up to 2,500 mm, wire diameter ranging from 0.9 to 3.2 mm, wire pitch from 3.8 to 20 mm, and width pitch from 19 to 200 mm.
Edge Types: Available in "Z" or "S" types, with specific edge sizes required for inquiries.
Temperature Range: Suitable for working temperatures from -100 °C to +400 °C.

Advantages

Lightweight design for efficient conveying.
Good operational characteristics, especially with "Z" type sprocked edges.
Capability to use small diameter drums.
Single wire level for easy cleaning.
Open mesh structure allows for good circulation and permeability of gases, liquids, and small particles.

Inquiry Requirements

Material type.
Belt width and center-center Z-Edge in mm.
Wire diameter in mm (d).
Pitch of wire or inner mesh opening in mm (l).
Pitch of width in mm (TB).
Confirmation of edge type ("Z" or "S").
Edge sizes in mm (S & Z).

Conclusion
The document outlines the essential specifications and advantages of the Braided Rod Belts, emphasizing their suitability for high-temperature applications and their efficiency in the confectionery industry. For inquiries, detailed specifications regarding material, dimensions, and edge types are required.

Catalog excerpts

Enrobing Belts. Braided Rod Belts of Group 700

Open the catalog to page 1

Enrobing Belts - Braided Rod Belts of Group 700 n light weight belt made and used for conveying only, as coating or enrobing grid for chocolate, sugar confectionary and biscuits n designed of crimped thin round wires, bent at right angles and hooked n it is either with or without sprocked edges as rim reinforcement and guide on a toothed drum n to be used for working temperatures from -100 °C up to +400 °C n in width up to 2.500 mm n material: galvanized or tinned mild steel/ spring steel/ various stainless steel grades wire 0,9 to 3,2 mm Ø/ wire pitch 3,8 to 20 mm/ width pitch 19 to 200 mm/...

Open the catalog to page 2

All Steinhaus catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list