Accessories • Bearing elements • Clamping pivots, coupling pins • Magnets • Screws and cylinder pins • Template and foil belts • Cast resin, model resin • Connection elements, adhesives, lubricants • Lubricants such as high-performance oil and grease

Accessories SZ 4035 page 6.04 SZ 4080 page 6.04 SZ 4125 page 6.05 SZ 4129 page 6.05 SZ 4160 page 6.06 SZ 4161 page 6.06 SZ 4381 page 6.07 SZ 4385 page 6.07 SZ 4390 page 6.08 SZ 4391 page 6.09 SZ 4366 page 6.10 SZ 4351 page 6.12 SZ 4361 page 6.12 SZ 4371 page 6.13 SZ 4432 page 6.14 SZ 4434 page 6.14 SZ 4512 page 6.15 SZ 4513 page 6.15 SZ 4516 page 6.16 SZ 8530 page 6.16 SZ 9335 page 6.17 SZ 9336/7 page 6.17 SZ 8510/15 page 6.18 SZ 8512 page 6.19 SZ 7900 page 6.20 SZ 7905 page 6.21 SZ 9503 page 6.22 SZ 9511 page 6.23 SZ 9515 page 6.23 SZ 9850 page 6.24 SZ 9851 page 6.24 SZ 9853 page 6.24 SZ 9006...

NORM ALIEN The receiving-chuck is used togetherwith a wobbler for a loose assembly of the die set upper plate with the press plunger. The plug diameters are in accordance with the stan- dardized press plunger bore-holes. They are suitable to all Steinel wobblers Order example: Unworked receiving-chucks Unworked receiving-chucks are provided with center bore-holes and can be re-turned on a turning lathe to any plug diameter. They are suitable to all Steinel wobblers. Order example:

NORM ALIEN Order example: Eye bolt SZ 4381 permitted (only vertically] order number Carrying force With key, hexagon shape Material: 1.6541 forged, high-tensile quen- ched and tempered. 100% electromagnetic Characteristic: Distinct load capacity specifi- cation for the unfavourable load F area, which Note: The eye ring is rotatable on ly when Order example: Eye ring, rotatable order number

Order example: Load hook SZ 4391 Rotating load hook Order number SZ 4391.16 • Running in two sets of ball bearings for joltfree tilting, rotating and • Suitable for all separate lifting accessories -whether hooks, loops or • Forged, hardened & tempered safety latchcatching inhook tip-this safeguards against lateral bending. • Triple coiled, stainless steel double torsion spring. • Thickened hook tip against improper use. order number

with safety ring Carrying bolt with safety ring Areas of application: Press tools with cast carrying inserts Note: The bolts must always be inserted from the outside to the middle of the tool, some exceptions possible. Note the safety area on both outsides of the casting and the assembly area on one side. Do not leave any carrying bolts in the upper part of the tools during production. Remove them beforehand, in order to prevent any accidents. The maximum load capacity d1 is measured, so that fc/vo bolts are used to carry the tool. Secure and calk part 2 with ' _octite, in addition to fastening...

NORM ALIEN

NORM ALIEN Carrying screws Attachment onto the workpiece laterally by Note: Provide for4 carrying screws, one carrying screw for half a tool weight Order example: Carrying screw SZ 4351 order number Carrying bolts Attachment onto the workpiece laterally by knock-in with tight fit and additional welding Note: Provide for4 carrying bolts, one carrying bolt for half a tool weight Order example: Carrying bolt SZ 4361 order number

Clamping elements SZ 4432, SZ 4434 Ball pressure screws with cylindrical head and hexagonal recess Material: Screw grade of rmness 12.9, ball hardened Ball attened and run movable up to 9°. By that, surfaces, which are not plane parallel, can be tensed or supported. Order example: Ball pressure screws with cylindrical head and hexagonal recess SZ 4432 d1 = M 8, l = 50 mm Add 08 x 50 Order number SZ 4432.08 x 50 Add size to order number Order no. SZ 4432. x Add size to order number Order no. SZ 4432. Ball d1 l M 6 20 30 40 M 8 20 35 50 b d2 k 17 10 6 27 24 16,5 13 8 31,5 28 x Add size to order...

Holding magnets SZ 9335, SZ 9336, SZ 9337 round and at Holding magnets round Screened system Application temperature up to 450° C Adhesive surface **) Mounting hints: Round holding magnets SZ 9335 are pressed, shrunk or glued into the mounting bore-holes. How to do the mounting is shown in the illustration. Order example: Holding magnets round SZ 9335 d = 6 mm Add 06 Order number SZ 9335.06 Workpiece to be held Add size to order number Iron Non-magnetable material Mounting example *) The holding magnets can be shortened by the measure l2 without any reduction of the adhesion. **) The adhesive...

Sawing strips in boxes Material: High-alloy Swedish steel Order example: Sawing strip SZ 9503 order number each cm each inch mm order number each cm each inch mm_ Standard values for numbers ofteeth (z/cm) and cutting speeds v in m/min

Precision gauge strips Foil strips in the plastic box made of steel and brass Order example: Foil strips made of brass order number Precision gauge strips in the pile box Made of best cold-rolled and hardened tracer gauge strip steel Surface polished Extremely plane with tightest thickness Order example: Precision gauge strip order number Thickness Width Length (m]

High-performance oil and grease High-performance oil Characteristics: The high-performance oil with molybdenumdisulphide (MoS2)-additive is especially well suited for highly stressed narrow running ts due to its viscosity and composition. The viscosity additive acts anti-attritioning creating a bearing armouring having excellent emergency running properties. in a canister 5 l Order number SZ 9850 Fields of application: Lubrication of die sets, guides, etc. 400 ml in a spray can Order number SZ 9851 High-performance oil (Slidingway oil No. 1) Characteristics: Modern demulsifying sliding way oil...

Fat solvent, anti-corrosion oil, slushing oil, tracing paint Fat solvent The solvent from the spray can easily softens oil and fat coats and removes them. Parts which are to be cast en bloc, glued or sprayed with tracing paint should be cleaned with fat solvent from the spray can. The adhesive force of the compound is thereby essentially increased. 300 ml in the spray can Order number SZ 9010 Combustible! Filled with safety fuel gas Anti-corrosion oil For untightening struck or corroded screws, nuts, interference ts etc. Effective lubrication of chains, locks, hinges etc. Little surface tension,...