Standardised module systems

Product catalog summary

Introduction
The document outlines the standardized module systems developed by STEINEL, which consist of a machine-specific basic structure, a tool-specific adapter plate, and standardized tool modules. These components are designed to optimize production facilities and accommodate various tool modules.

Machine-Specific Basic Structure
The basic structure is tailored for production facilities and includes rear standing guides, pre-loaded spring packs for blank holder forces, and positioning and mounting points for adapter plates and tool modules.

Tool-Specific Adapter Plate
The adapter plate is installed on the lower plate and provides mounting points for tool modules. It can incorporate additional mechanisms such as band inlets, feed control, and chopping stations.

Standardized Tool Modules
Tool modules are available in two widths (200 and 250 mm) and six lengths (100 to 350 mm). They feature mechanical and optical protection against torsion, a maximum press stroke of 45 mm, and standardized guide strokes. Modules are equipped with ball guides and receiving points for blank holder forces. STEINEL provides STEP data for module processing.

Material and Specifications
All components are made from Steel 1.2379 with a hardness of 58+2 HRC. The document lists various parts such as lower pressure plates, frame plates, guide plates, intermediate plates, retaining plates, and upper pressure plates, each with specific dimensions and item numbers.

Conclusion
The modular system allows for quick changes and customization, with complete modules, spare parts, and assembly groups available for purchase. STEINEL offers assistance with the installation of active elements upon request.

Catalog excerpts

Standardised module systems Standardised module systems Basic structure Adapter plate Machine elements Tool modules

Open the catalog to page 1

Standardised module systems General The modular tool system from STEINEL consists of a machine-speciﬁc basic structure, a tool-speciﬁc adapter plate and standardised tool modules. The machine-speciﬁc basic structure modules. Additional tool-speciﬁc mechanisms and functions may also be implemented, for example: Band inlet Feed control Chopping station Speciﬁc waste material and part contours The standardised tool modules The basic structure is optimally designed for the production facility and the maximum bandwidth, and it includes: rear standing guides Pre-loaded spring packs for the creation...

Open the catalog to page 3

Standardised module systems Tool modules The tool modules are available from stock in two widths (200 and 250 mm) and six lengths (100 to 350 mm). Depending on their size, the modules are equipped with two or four ball guides. The following applies to all tool modules mechanical protection against torsion optical protection against torsion via chamfer 5 x 45° over the overall height of the plates, chamfer right rear maximum press stroke 45 mm corresponds to the standardised guide stroke (6 mm) at the time of delivery Modules guided with two pillars are pre-equipped with four receiving points...

Open the catalog to page 4

ST0900 Tool modul not mounted Note The unassembled module is delivered as an assembly kit; it includes the associated frame, guide, intermediate, retaining and pressure plates and the guide unit assembly group and accessories b 200 Machine elements

Open the catalog to page 5