Machine elements

Product catalog summary

Introduction
This document provides technical specifications and details for various machine elements, including pneumatic stamping units and toggle-lever presses. It includes information on accessories and installation instructions.

Pneumatic Stamping Units
ST1092: Features a round working surface and consists of a pneumatic cylinder, threaded flange, die set with ball guide, and traverse. The document lists different models with specifications such as cylinder dimensions, compressive force at 6 bar, and stroke.
ST1292: Similar to ST1092 but with a rectangular working surface. It also includes detailed specifications for various models.

Pneumatic Cylinder (ST9041)
Complies with DIN ISO 6431 standards. Installation instructions suggest suitability for use without a flange and provide guidance on enlarging guide pillar lengths. Hydro-supported pneumatic cylinders are available upon request.

Traverses
ST9061: Not bored, made from grey cast iron EN-GJL-250, with dimensions and item numbers provided.
ST9062: Bored version with additional specifications including bore sizes and item numbers.

Threaded Flange (ST9067)
Specifications include thread sizes, dimensions, and item numbers.

Mounting Table (ST9072)
Designed for pneumatic stamping units, with dimensions and a note on the thickness of the work surface.

Toggle-Lever Presses (ST912x)
These presses feature adjustable hand levers, height adjustability, large ram strokes, and compact design. Specifications include dimensions, compressive force, weight, and space requirements. The document also details the conversion capability of certain models to different compressive forces.

Catalog excerpts

Machine elements Machine elements Pneumatic stamping unit Toggle-lever presses

Open the catalog to page 1

Note Scope of supplyConsisting of pneumatic cylinder, threaded flange, ST1002; ST9062; ST9067; ST9041die set with ball guide, traverse d, / d2x 1 D d3 d5 e, t 0 CyMnder C°mpressive force F at 6 bar StrokeCy^, hmax Item number

Open the catalog to page 3

Note Scope of supplyConsisting of pneumatic cylinder, threaded flange, ST1202; ST9062; ST9067; ST9041die set with ball guide, traverse d, / d2 x l a, x b, d3 d5 e1 l t 0 Cyllnder Compressive force F at 6 bar Stroke Cyllnder hmax Item number

Open the catalog to page 4

DIN ISO 6431 Installation instruction The next size is suitable for use without flange; screw on from underneath; if required, enlarge the length (I) of the guide pillars appropriately Note Hydro-supported pneumatic cylinders available upon request; diameter 200 has no flange

Open the catalog to page 5

Material Grey cast irons EN-GJL-250 a3 b3 d1 d2 e1 h, Item number

Open the catalog to page 6

for pneumatic stamping unit Size (W x H x D) Item number Note Thickness of the work surface: 42.5 mm

Open the catalog to page 7

The ST912x toggle-lever presses boast 360° adjustable hand levers, height adjustability, large ram strokes, work tables with T-slots for tool fixing, clearance boreholes in the middle of the tables and a compact and stable design, while taking up little space. Note via a change of the bearing bolt, ST9124, ST9126 convertible to 12 kN or 16 kN at max. stroke 25 mm

Open the catalog to page 8