Guide units
88Pages

Guide elements

Guide elements ST 7451 page 3.50 ST 7402 page 3.51 ST 7406 page 3.51 ST 7403 page 3.52 ST 7404 page 3.53 ST 7405 page 3.54 ST 7412 page 3.56 ST 7416 page 3.56 ST 7413 page 3.58 ST 7414 page 3.60 ST 7415 page 3.62 ST 7419 page 3.64 ST 7471 page 3.66 ST 7431 page 3.68 ST 7422 page 3.70 ST 7426 page 3.70 ST 7423 page 3.72 ST 7424 page 3.74

Guide bushings DIN 9831/ISO 9448 Standardized outside diameter Advantage: Reciprocal interchangeability Ball guide aluminium Steel sliding guide bronze plated Interchangeability of all guide bushings For each bore, you can use: Two different inside diameters, for example 30/32 Seven different types of guidance, for example: three sliding guide and four ball guide types Three different bushing types, for example: shoulder, flange or smooth bushings Three different bushing lengths (for inside diameters from 19 to 80) Therefore, it is possible to use 2 x 7 x 3 x 3 = 126 different guide...

Steinel precision sliding guides steel bronze plated or with solid lubricant Steel sliding guide bronze plated Sliding guide with solid lubricant Fields of application Steinel precision sliding guides ”steel bronze plated“ or with ”solid lubricant“ are used for longitudinal motion in the manufacture of tools,fixtures, machines, medical devices and automobiles. They are characterized by their high load capacity and resistance to wear. Component arrangement The Steinel precision sliding guide ”steel bronze plated“ or with ”solid lubricant“ is composed of a guide pillar and guide bushing with...

Steinel precision guides Ball guides Special features of Steinel precision ball guides • Interchangeability is ensured due to the uniformlyselected precision steel balls. • Precision due to the microfinished contact surfaces and uniformly selected precision steel balls. • Special designs can be manufactured according to your drawings. • Friction-free movement due to the rolling motion of the balls. Loading capacities Clearance-free guidance due to the optimal preloaded rolling motion of the balls between the guide pillar and guide bushing. • Long lifespan due to the free-wheeling mounting...

Steinel precision guides Roller guides Special features of the Steinel precision roller guides Precision due to the microfinished contact surfaces and uniformly selected precision profile rollers. Friction-free movement due to the rolling motion of the rollers. Clearance free guidance due to the optimal preloaded rolling motion of the profile rollers between the guide pillar and guide bushing. Long lifespan due to the free-wheeling mounting and helical positioning of the profile rollers, so that each roller has its own track. Fields of application Steinel precision roller guides are used...

Guide pillars ST 7190 Mini-series Material: Ø d 3 – 6 mm steel 1.2379 hardened, hardness 60+3 HRC steel, 1.7131 induction hardened, depth of hardening 0,8 – 1,2 mm, depends on Ø, hardness 60 – 64 HRC Steinel-guide pillars are ground on all sides. The guide diameter is super-fine ground finish and lapped to tolerance ISO h3. Mount into mounting holes ISO P6. Order example: Guide pillar ST 7190 d1 = 8, l = 80 mm Add 08 x 080 Order number ST 7190.08 x 080 Add size to order number x Ball bearings – Mini series d3 d2 Steinel ball-bearings are distinguished by exceptional precision and...

Guide bushes ST 7191 Mini-series Order example: Guide bush ST 7191 d1 = 8, l = 30 mm Add 08 x 030 Order number ST 7191.08 x 30 Material: steel 1.3505 (100 Cr 6) hardened, hardness 61 – 63 HRC Explanation: Steinel-guide bushes are ground on all sides. The guide diameter (bore) is super-fine honed and will be matched with the pillar to ensure an optimal preload. Mounting instructions: If possible avoid press fit. Fit in tensionfree into the mounting bore hole ISO H6 and secure it with glue. Add size to order number Ball cages ST 7192 Mini-series Material: Ball cages made of brass, balls of...

Guide pillars ST 7100 precision ground for press fitting DIN 9825, ISO 9182 Material: Steel 1.11221 (Ck60) induction hardened, hardness 62-64 HRC Guide diameter ISO h3 superfinish ground and microfinished mounting into mountingholes ISO R6 Starting at sheet thickness 50 mm N6 Upon request also available grooved for holding ring. Please add part number description “with groove and holding ring ST 7105” to your order. Order example: Guide pillar ST 7100 d1 = 25, l = 180 mm Add 25 x 180 Order number ST 7100.25 x 180 Application: Due to the high precision of the guide pillars ST 7100 they are...

Special lengths: special lengths available upon request. Induction hardened, super-fine ground finish ISO h4, max. lenghts according to table: Diameter Max.lengths Design for guide pillars with holding ring ST 7105 Drawing for guide pillars h3 Add size to order number Add size to order number Drawing for guide pillar holding plates 120°

Guide pillars ST 7106 precision ground for press fitting with internal thread Similar to DIN 9825/ISO 9182 Material: Steel 1.11221 (Ck 60) induction hardened, hardness 62-64 HRC Order example: Guide pillar ST 7108 d1 = 25, l = 180 mm Add 25 x 180 Order number ST 7108.25 x 180 Guide diameter ISO h3 superfinish ground and microfinished mounting into mountingholes ISO R6 Starting at sheet thickness 50 mm N6 Application: Due to the high precision of the guide pillars ST 7106 they are suitable to all Steinel guide bushes for sliding, ball and roller guides. Especially in connection with ball...

Mounting of the guide pillars Special lengths: special lengths available upon request. Induction hardened, super-fine ground finish ISO h4, max. lenghts according to table: Diameter Max. lengths Add size to order number Internal thread both sides Thread mold side Ø 19 – 32 = M 8 Ø 38 – 50 = M 10 Ø 60 – 80 = M 12 Internal thread Order no. ST 7106. both sides d1h3 Add size to order number x Before inserting the pillars into the upper plate, clean the holes thoroughly and oil lightly (no grease). Do the same with the holes in the lower plate. Put parallel bars between upper and lower plate....