Die sets
78Pages

for progressive stamping tools Special designs Maschine Module elements system with lamellar graphite Machine Accessories elements Tapping units Nitrogen systems Spring elements Active elements Guide units made from steel and cast iron Steel plates

Steel die sets Standardised steel die sets are available in numerous sizes with two pillars in the diagonal, back-positioned and middle variants, as well as with four pillars. They are equipped with sliding or ball guides. The low-tension annealed frame plates are machined on all sides and plane-parallel ground. All steel die sets are tested in accordance with DIN 1690 Part 1, and are therefore free from cavities, cracks and inclusions. Depending on the variant, the die sets made of steel can be delivered with or without guide plates Cast-iron die sets with lamellar graphite The...

Die sets for progressive stamping tools, steel plates Die sets for progressive stamping tools The standardised die sets for progressive stamping tools are equipped with sliding or ball guides and are available in various sizes. These basic structures allow various production steps to be carried out successively, such as punching, embossing, and bending. Any generated lateral forces are optimally absorbed by the middle mount shoulder pillars in the guide plate. Steel plates The steel plates – made from the material 1.1730 (C45) – are available in various sizes. They are low-tension annealed,...

Die sets and plates can also be manufactured according to your own specifications. The plates are, depending on their size, plane-parallel ground (up to 2000 x 1000 x 350 mm) or precision-milled (up to 1500 x 350 mm). At our production locations, we can quickly produce die sets matching your tool concept. We prefer processing low-tension annealed 1.1730 (C45) and the high-strength aluminium alloy EN AW 7075 (AlZnMgCu1.5). Upon request, we also process materials such as 1.2312 (40CrMnMoS8-6) and TOOLOX. For us to be able to respond to your questions quickly and succinctly, please send us...

Referring to DIN 9868 Pillar position parallel centred Material Steel 1.1730 Note Size c1, c2 +0.2 to +0.5 Type of guidance Ball guide

Machine Module Tapping Nitrogen Spring Active Guide elements system units systems elements elements units

parallel centred Material Steel 1.1730 Note Size c1, c2 +0.2 to +0.5 Type of guidance Sliding guide bronze plated Machine Module Tapping Nitrogen Spring Active Guide elements system units systems elements elements units

Machine Module Tapping Nitrogen Spring Active Guide elements system units systems elements elements units ST3539 Die setwith sliding guide, bronze coating Version 08.2019

Referring to DIN 9868 Pillar position diagonal Material Steel 1.1730 Note Size c1, c2 +0.2 to +0.5 Type of guidance Ball guide

Machine Module Tapping Nitrogen Spring Active Guide elements system units systems elements elements units

Referring to DIN 9868 Pillar position diagonal Material Steel 1.1730 Note Size c1, c2 +0.2 to +0.5 Type of guidance Sliding guide bronze plated

Machine Module Tapping Nitrogen Spring Active Guide elements system units systems elements elements units

Referring to DIN 9868 Pillar position rear standing Material Steel 1.1730 Note Size c1, c2 +0.2 to +0.5 Type of guidance Ball guide

Machine Module Tapping Nitrogen Spring Active Guide elements system units systems elements elements units

rear standing Material Steel 1.1730 Note Size c1, c2 +0.2 to +0.5 Type of guidance Sliding guide bronze plated Machine Module Tapping Nitrogen Spring Active Guide elements system units systems elements elements units

Machine Module Tapping Nitrogen Spring Active Guide elements system units systems elements elements units

Referring to DIN 9868 Pillar position rectangular Material Steel 1.1730 Note Size c1, c2 +0.2 to +0.5 Type of guidance Ball guide

Machine Module Tapping Nitrogen Spring Active Guide elements system units systems elements elements units

Referring to DIN 9868 Pillar position square Material Steel 1.1730 Note Size c1, c2 +0.2 to +0.5 Type of guidance Sliding guide bronze plated

Machine Module Tapping Nitrogen Spring Active Guide elements system units systems elements elements units

Referring to DIN 9868 Pillar position parallel centred Material Steel 1.1730 Note Size c1, c2, c3 +0.2 to +0.5 Type of guidance Ball guide

Machine Module Tapping Nitrogen Spring Active Guide elements system units systems elements elements units

parallel centred Material Steel 1.1730 Note Size c1, c2, c3 +0.2 to +0.5 Type of guidance Sliding guide bronze plated Machine Module Tapping Nitrogen Spring Active Guide elements system units systems elements elements units

Machine Module Tapping Nitrogen Spring Active Guide elements system units systems elements elements units

Referring to DIN 9868 Pillar position diagonal Material Steel 1.1730 Note Size c1, c2, c3 +0.2 to +0.5 Type of guidance Ball guide

Machine Module Tapping Nitrogen Spring Active Guide elements system units systems elements elements units

Referring to DIN 9868 Pillar position diagonal Material Steel 1.1730 Note Size c1, c2, c3 +0.2 to +0.5 Type of guidance Sliding guide bronze plated

Machine Module Tapping Nitrogen Spring Active Guide elements system units systems elements elements units

Referring to DIN 9868 Pillar position square Material Steel 1.1730 Note Size c1, c2, c3 +0.2 to +0.5 Type of guidance Ball guide Item number

Machine Module Tapping Nitrogen Spring Active Guide elements system units systems elements elements units

Referring to DIN 9868 Pillar position square Material Steel 1.1730 Note Size c1, c2, c3 +0.2 to +0.5 Type of guidance Sliding guide bronze plated Item number

Machine Module Tapping Nitrogen Spring Active Guide elements system units systems elements elements units

Material Steel 1.1730 Type of guidance Ball guide Note Material of pressure plate and punch holding plate 1.2842 (90MnCrV8); pressure plate deliverable in hardened form upon request Optional accessories SZ8565.10; SZ8565.20; SZ8565.30; SZ8565.40