Active elements
52Pages

Cutting punch Tapping units Active elements Nitrogen systems Spring elements Active elements Drill bushes Punch guide bushes Module system Cutting bushes Ejector pins Machine elements Shape-cutting elements

In punching and bending tools, active elements are the cutting and shaping parts. Here, the highest requirements in dimensional accuracy and surface quality must be met. Active elements are wearing parts and can be replaced several times over the course of a tool's life time. In addition to standard active elements, STEINEL also offers individual solutions tailored to your specifications. Upon request, you will receive all required active elements from a single source - from a single unit to mass production. Properties ■ Starting materials for the STEINEL active elements are high-quality...

with trumpet head - D 3.0-20.0 71, 80, 100 HSS with conical head DIN 9861 / ISO 6752 D 0.8-16.0 71, 80, 100 HSS, HWS, PM with cylindrical head ISO 8020 A 3.0-25.0 71,80, 90, 100 HSS, PM Quick-change cutting punch DIN ISO 10071 - 6.0-25.0 71, 80 HWS for pressing-in with shoulder ISO 8977 B 1.0-25.0 25, 32 HSS Quick-change cutting bushes - - 2.0-25.0 32 HWS

continuously shaped (with/without hot upset head) square, rectangular, oval 80 with reduced shaft, with twisting surface square, rectangular, oval Shape-cutting bushes1 Material with shoulder, with twisting surface DIN ISO 8977 square, rectangular, oval 32 *available in several versions, and as a special design Machine Module Tapping Nitrogen Spring elements system units systems elements available in several versions, and as a special design

Shape D Material HSS Head hardness 50 ±5 HRC Shank hardness 64 ±2 HRC Note deliverable with PVD coating upon request

Shape C Material HSS Head hardness 50 ±5 HRC Shank hardness 64 ±2 HRC Note deliverable with PVD coating upon request d,h6 d2h6 d3 a k+0-2 l, r -0-2 Grading l Item number Machine Module Tapping Nitrogen Spring elements system units systems elements

Material HardnessHSS 63 ±2 HRC df d2h8 d3h11 l l, l2 l3 R Item number

Referring to DIN 9861/ ISO 6752 Shape D Material

Referring to DIN 9861/ ISO 6752 Shape D Material PM

Referring to DIN 9861/ ISO 6752 Head hardness50 ±5 HRC Shape D Shank hardness64 ±2 HRC Material HSS Notedeliverable with PVD coating upon request d1h6 d Machine Module Tapping Nitrogen Spring elements system units systems elements

50 ±5 HRC Shape C Shank hardness deliverable with PVD coating upon request Machine Module Tapping Nitrogen Spring elements system units systems elements

Material Shank hardness HWS 62 ±2 HRCNote deliverable with PVD coating upon request d2h6 d3 l *0-3 l, d,h6 Item number

Head hardness 50 ±5 HRC Shank hardness 64 ±2 HRC Note deliverable with PVD coating upon request Machine Module Tapping Nitrogen Spring elements system units systems elements

Head hardness 50 ±5 HRC Shank hardness 64 ±2 HRC Note deliverable with PVD coating upon request

Head hardness 50 ±5 HRC Shank hardness 64 ±2 HRC Note deliverable with PVD coating upon request Machine Module Tapping Nitrogen Spring elements system units systems elements

50 ±5 HRC Shape B Shank hardness

ISO 8020 Head hardness50 ±5 HRC Shape E Shank hardness64 ±2 HRC Material HSS Notedeliverable with PVD coating upon request k+(M - +°.2 r 0 - +a1 l+0.5 Item number Machine Module Tapping Nitrogen Spring elements system units systems elements

ISO 8020 Head hardness50 ±5 HRC Shape F Shank hardness64 ±2 HRC Material HSS Notedeliverable with PVD coating upon request d1j6 d2m5 d3 d4 k+a1 - +0.2 l1+0,5 r 0 - +a1 Grading l+0.5 Item number

DIN ISO 10071 Shank hardness62 ±2 HRC Material HWS Notedeliverable with PVD coating upon request d2g5 Machine Module Tapping Nitrogen Spring elements system units systems elements

DIN ISO 10071 Shank hardness62 ±2 HRC Material HWS Notedeliverable with PVD coating upon request d1j6 d2g5 d5 l1 Grading l+0.5 Item number

Material HardnessHWS 60 ±2 HRC d,HS d2h6 d4 d5 l l2 Grading Item number Machine Module Tapping Nitrogen Spring elements system units systems elements

SZ5691 Shape-cutting punch with cylindrical head, square, with protection against torsion Note Diagonal dimension, however, max.d2 -0.2 mm; free choice of size a; please specify the position of the protection against torsion α when ordering; deliverable with PVD coating upon request Item number Item number

aH8 d2m5 Note Free choice of size a; diagonal dimension, however, max.d4 -1.0 mm; please specify the position of the protection against torsion a when ordering Machine Module Tapping Nitrogen Spring elements system units systems elements

SZ5692 Shape-cutting punch with cylindrical head, rectangular, with protection against torsion Note Free choice of sizes a x b; diagonal dimension, however, max.d2 -0.2 mm; please specify the position of the protection against torsion α when ordering; deliverable with PVD coating upon request Item number

ISO 8977 Material HSS Note Free choice of sizes a x b; diagonal dimension, however, max.d4 -1.0 mm; please specify the position of the protection against torsion a when ordering Machine Module Tapping Nitrogen Spring elements system units systems elements

SZ5693 Shape-cutting punch with cylindrical head, oval, with protection against torsion Note Free choice of sizes a x b; please specify the position of the protection against torsion α when ordering; deliverable with PVD coating upon request Item number

ISO 8977 Hardness63 ±1 HRC Material HSS NoteFree choice of sizes a x b; please specify the position of the protection against torsion a when ordering aH8 bH8 d2m5 d3 d4 k+0-25 l,+0-5 l. Machine Module Tapping Nitrogen Spring elements system units systems elements

Material HSS Shank hardness 64 ±2 HRC Note Shank, super-finished; free choice of size a; deliverable with PVD coating upon request Item number SZ6981